Overvoltage protection
- Leakage current 3 kA
- SPD type 3
- Installed in flush-mounted box
- SPD Type 2 (1 varistor)
- Replaceable varistor module
- Visual and remote signalling of varistor status
- SPD Type 2 (3 varistors + 1 spark-gap)
- Combination of replaceable varistor and encapsulated spark gap modules
- Visual and remote signalling of varistor status
Insert able Varistor-Safety module as replacement over-voltage conductor.
Surge protection for terrestrial cable and satellite signals. The surge adapter C-TV/HiFi is suitable for antenna inputs w...
- For distribution cabinet, network (RJ45)
- leakage current 10 kA
- nominal voltage 48 V
- Up to 5 million insurance cover
- leakage current 13.5 kA
- SPD Type 2 (1 varistor + 1 spark-gap)
- Combination of replaceable varistor and encapsulated spark gap modules
- Visual and remote signalling of varistor status
Lightning current surge arrester for the protection of consumer installations.
- Pluggable surge arrester acc. to type 2 / Class II
- For 3-phase power supply systems with separate N and PE (5-wire system: L1, L2, L3, N, PE)
- For systems with increased safety requirements
- SPD Type 2 (3 varistors)
- Replaceable varistor module, 3 pole
- Visual and remote signalling of varistor status
Pluggable spark gap protection module as replacement for surge arrester.
LSA-PLUS plug (COMTRAB CT 10) with surge voltage coarse and fine protection for 10 floating signal circuits. Nominal volta...
- Class II with varistors
- Pluggable and codable protective elements
- High leakage current with short response time
Space-saving installation through narrow width of 6.2 mm. Signalling without additional auxiliary power, with mechanical s...
Space-saving installation through narrow width of 6.2 mm. Signalling without additional auxiliary power, with mechanical s...
Space-saving installation through narrow width of 6.2 mm. Signalling without additional auxiliary power, with mechanical s...
Space-saving installation through narrow width of 6.2 mm. Fast and tool-free installation of surge protection devices than...
Space-saving installation through narrow width of 6.2 mm. Signalling without additional auxiliary power, with mechanical s...
Space-saving installation through narrow width of 6.2 mm. Signalling without additional auxiliary power, with mechanical s...
Space-saving installation through narrow width of 6.2 mm. Fast and tool-free installation of surge protection devices than...
Space-saving installation through narrow width of 6.2 mm. Signalling without additional auxiliary power, with mechanical s...
Extremely space-saving installation through narrow width of only 3.5 mm. Fast and tool-free installation of surge protecti...
Space-saving installation through narrow width of 6.2 mm. Signalling without additional auxiliary power, with mechanical s...
Space-saving installation through narrow width of 6.2 mm. Signalling without additional auxiliary power, with mechanical s...
Space-saving installation through narrow width of 6.2 mm. Signalling without additional auxiliary power, with mechanical s...
The varitector overvoltage protection of the series VPU PV I (type I) and II (Type II) protects VPU PV photovoltaic system...
The varitector overvoltage protection of the series VPU PV I (type I) and II (Type II) protects VPU PV photovoltaic system...
Multi pin lightning arresters according to the requirements of the class II in accordance with IEC 61643, EN 61643:2013 is...
Multi pin lightning arresters according to the requirements of the IEC 61643, EN 61643: Class I after 2013 is used the arr...
Multi pin lightning arresters according to the requirements of the IEC 61643, EN 61643: Class I after 2013 is used the arr...
The varitector overvoltage protection of the series VPU PV I (type I) and II (Type II) protects VPU PV photovoltaic system...
Spare arrester from V0 Material for surge arrester VPU II 280 V LCF series the pluggable high-performance resistors can be...
Multi pin lightning arresters according to the requirements of the IEC 61643, EN 61643: Class I after 2013 is used the arr...
Multi pin lightning arresters according to the requirements of the IEC 61643, EN 61643: Class I after 2013 is used the arr...