Pliers
- To lace concrete reinforcing steel with binding wire from a roll
- Wire is twisted and cut in a single pass
- High-leverage joint, minimising strain, even when thick binding wires are used
- Replaces a set of screw wrenches, metric and imperial
- Smooth jaws for gentle assembly of with refined surface fittings - working directly on chrome!
- Adjustable screw tool
- The Mini pliers for fine mechanical work
- especially suitable for working on small glands
- very good accessibility in very confined spaces
- Knipex 03 02 180 Combination Pliers 180 mm
- Knipex 26 12 200 Snipe Nose Side Cutting Pliers 200 mm
- Knipex 70 02 160 Diagonal Cutter 160 mm
- Jaw Opening Max: 95 mm, Overall Length: 400 mm
- Adjustment at the touch of a button directly on the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- Replaces a set of screw wrenches, metric and imperial
- Smooth jaws for gentle assembly of with refined surface fittings - working directly on chrome!
- Adjustable screw tool
- Jaw Opening Max: 46 mm, Overall Length: 250 mm
- Adjustment at the touch of a button directly on the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- Jaw Opening Max: 30 mm, Overall Length: 150 mm
- Adjustment at the touch of a button directly on the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- Cable cross-sections: 0.75 to 6 mm² · Strip: from 0.75 - 6.0 mm² · Shortening screws M 2.6 - M 5.
- High loadable, elastic precision points
- Half-round, long jaws
- Serrated gripping surfaces
- Jaw Opening Max: 27 mm, Overall Length: 125 mm
- Adjustment at the touch of a button directly on the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- High loadable, elastic precision points
- Half-round, long jaws
- Serrated gripping surfaces
- Replaces a set of screw wrenches, metric and imperial
- Smooth jaws for gentle assembly of with refined surface fittings - working directly on chrome!
- Adjustable screw tool
- For pressing of wire end sleeves DIN 46228 Part 1 + 4
- Self-adjusting adjustment to the desired wire end sleeves size: no crimp errors by using the wrong crimp insert
- Frontal introduction of wire-end sleeves in the tool
- High quality precision tools
- Set includes: 6 precision screwdrivers, wire cutters, flat nose pliers, stainless steel tweezers and ratchet screwdriver with bits
- Easy crimping thanks to optimized transmission ratio
- Light-weight and slim design
- For crimping of cable end sleeves DIN 46228 part 1 + 4 within the range of 0.25 to 16 mm ².
- With gripping zones for flat and round material, suitable for versatile use
- With cutting edges for soft and hard wire
- Long cutting edges for thicker cables
- Square crimping for optimum contact areas in the clamp connection
- For DIN-compliant crimping of terminals in a profile from 0.08 up to 10 mm ²
- Fts all twin- ferrules within the application range
- Jaw Opening Max: 60 mm, Overall Length: 300 mm
- Adjustment at the touch of a button directly on the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- Jaw Opening Max: 46 mm, Overall Length: 250 mm
- Adjustment at the touch of a button directly on the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- With additional strip facility for round cables
- Elastic Tips: form stable even in the warp
- Distortion-tolerant, elastic precision tips
- Flat-round, long, tapered jaws
- Consistent high crimping quality through precision inserts and lock (can be unlocked)
- Crimping pressure is factory-precisely adjusted (calibrated), operating positions
- Power strengthening through lever transmission for fatigue-free working
- To lace concrete reinforcing steel with binding wire from a roll
- Wire is twisted and cut in a single pass
- High-leverage joint, minimising strain, even when thick binding wires are used
- Can also be used as VDE-Version
- Easy crimping thanks to optimized transmission ratio
- Light-weight and slim design
- Lower grip width
- For pressing of wire end sleeves DIN 46228 Part 1 + 4
- Self-adjusting adjustment to the desired wire sleeve size
- Jaw Opening Max: 34 mm, Overall Length: 250 mm
- Adjustment at the touch of a button directly on the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- Adjustment by shifting one jaw directly on to the workpiece: fast, reliable and comfortable handling
- Opening at the touch of a button off the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- For punching holes in leather, textiles and plastics
- Six interchangeable punches, Ø 2 / 2.5 / 3 / 3.5 / 4 / 5, mm,
- With opening spring and locking device
- Suitable for finer gripping and cutting work
- Pointed, half-round jaws
- Knurled gripping surfaces
- With gripping zones for flat and round material, suitable for versatile use
- With cutting edges for soft and hard wire
- Long cutting edges for thicker cables
- Suitable for finer gripping and cutting work
- Pointed, half-round jaws
- Knurled gripping surfaces
- Jaw Opening Max: 36 mm, Overall Length: 180 mm
- Adjustment at the touch of a button directly on the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
With high-quality forceps covered with rubber.
- Side cutter 110 mm
- Front cutter 100 mm
- Combination pliers 115 mm
- Replaces a set of screw wrenches, metric and imperial
- Smooth jaws for gentle assembly of with refined surface fittings - working directly on chrome!
- Adjustable screw tool
- Fully open, sliding it grabs!
- Additional fast adjustment to the work piece through the buck
- Connects the tried-and-tested, secure locking of hinge bolt with an additional sliding feature, working in narrow and inaccessible areas of work easier
- Interchangeable Crimping
- 10 years manufacturer guarantee
- Heavy duty and wear resisting
- Different jaw styles
- Chrome vanadium electric steel, forged, oil-hardened
- 35 % less effort required than with conventional combination pliers
- Easier work due to optimised leverage
- Wwith cutting edges (hardness approx. 63 HRC) for soft and hard wire and piano wire
- For single-handed operation, multi-component handle grips & ergonomically shaped handles
- Chrome vanadium electric steel in special quality, oil-hardened
- Repetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism)
- More performance and comfort in comparison to conventional water pump pliers of the same length: 9-stage snap-in adjustment for 3% more gripping capacity
- Good access to the workpiece by slim design in the head and joint area
- Self-locking on pipes and nuts: no slipping on the workpiece, low handforce required
For the most demanding applications. By craftsmen for their precise workmanship popular. High wear resistance and well bal...
- Only one tool for the most common crimp applications
- Fast and simple changing of the crimp inserts without additional tools
- Secure and protected storage of changeable inserts in a round magazine
- With opening spring and safety catch
- Cutting hardened inductively in addition
- Repetitive, high crimping quality due to integral lock (self-releasing mechanism)
- Optimum transmission of force thanks to toggle lever for fatigue-reduced operation
- With length cutter and dismantling knife for ribbon cables 6 and 12 mm length
- For holding small parts without finger pressure.
- Good grip.
- Spring steel, chrome-plated
- Tools in the plastic deep-drawn part with transparent cover
- Attractive sales packaging with SB-hole punch
- Dimensions (W x H x D): 17 x 37 x 4 mm