Multimeters
- CAT IV 600V
- Built-in LED flashlight
- Polyswitch
- CAT II 600 V, CAT III 300 V
- Large LCD display with backlight
- Voltage measurement TRMS 0.001 V to 600 V AC
- Voltage measurement DC 0.1 mV to 600 V DC
- Clamp-on ammeter with automatic measuring range selection for effective values (TRMS) for more accuracyTest leads for measuring AC/DC voltage, resistance, continuity, frequency, capacitance and diode testingThermocouple for temperature measurementLoZ mode with low impedance for detecting and eliminating stray voltagescat IV 600 V, cat III 1000 V, class 2, double insulationStorm-proof design up to 2 m (6.6 ft)Display of low battery level and easily accessible battery compartment
- 3.5" TFT display (160x128 pixels)Built-in rechargeable battery (Lithium-ION 3.7 V)Automatic calibrationOne-hand operationResistance, capacitor, inductor, thyristor, triac, (Double) diode, Z-diode, Field effect transistor, Bipo-lartransistor, Infrared decoder (Hitachi coding)
- CAT II 600 V, CAT III 300 V
- Temperature and switch-on duration measurement
- Automatic junction boxes (ABS)
- Measurement with digital display (4000 digits)
- Accurate measurement of small currents (amp tip)
- CAT IV 300 V, CAT III 600 V4-digit illuminated LCD display (4000 points) with light sensorideal for measuring smaller currents
- 2.000 V DC
- 1,500 VAC
- AC/DC 1500 A POSSIBLE
- Typical applications of clip-on ammeter CMA-360B: MA current measurement for 2-wire irrigation, voltage and resistance measurements for irrigation/landscape lighting wiring systems, current measurements for pumps, lighting systems, etc.
- CAT III 300 VCAT II 450 V.
- Non-contact voltage tester integrated in the pliersBacklit LCD for easy reading in low lightAutomatic range measurementsAutomatic measuring range selection, storage, data storage and max. valueAutomatic switch-off after 10 minutes to protect the batteryDisplay of low battery level and easily accessible battery compartmentStorm-proof design up to 2 m (6.6 ft)cat III 600 V, Class 2, double insulation
- True RMS at ACV/ACA
- Non-contact voltage tester integrated in the pliersBacklit LCD for easy reading in low lightAutomatic measuring range selection for real effective values (TRMS) for more accuracyMeasures temperatures with a K-type thermocoupleAutomatic measuring range selection, data storage and max/min valueAutomatic switch-off after 10 minutes to protect the batteryDisplay of low battery level and easily accessible battery compartmentStorm-proof design up to 2 m (6.6 ft)cat III 600 V, Class 2, double insulation
- Clamp-on ammeter with automatic measuring range selection for effective values (TRMS) for more accuracyClamp ammeter measures AC currentTest leads for measuring AC/DC voltage, resistance, continuity and diode testingcat IV 600 V, cat III 1000 V, class 2, double insulationStorm-proof design up to 2 m (6.6 ft)Display of low battery level and easily accessible battery compartmentIncludes bag, test leads and batteriesOperating altitude up to 2,000 m (6,562 ft)
- 6 1/2 digit voltage and current measurement resolution
- Simultaneous current and voltage measurement
- Five current measurement levels (AC&DC): 30mA/ 300mA/ 3A/ 30A/ 300A
- Milliohm measurement with 4-wire connection (Kelvin measurement) with 200 mA or 1A
- Insulation tester with test voltages from 10 to 1000 V.
- Winding test with 1000 V test voltage
- Milliohm measurement with 4-wire connection (Kelvin measurement) with 200 mA or 1A
- Insulation tester with test voltages from 10 to 1000 V.
- Winding test with 1000 V test voltage
- Test lead holder on the clamp side and optional magnetic hanger for measuring device (Cat. No. 69445 or 69417) for hands-free operationNon-contact voltage tester integrated in the pliersEasy-to-read LCD display with reverse contrast for better visibility even in low ambient lightAutomatic measuring range selection for real effective values (TRMS) for more accuracyMeasures AC current and NCVT via the clamp as well as AC/DC voltage, resistance, frequency, DC microampere, capacitance, Duty cycle, diode test and continuity via test leads, and temperature with a thermocoupleMeasures temperatures with a K-type thermocoupleAutomatic switch-off after 10 minutes to protect the batteryDisplay of low battery level and easily accessible battery compartmentStorm-proof design up to 2 m (6.6 ft)cat III 600 V, Class 2, double insulation
- DIGITAL CLAMP-ON AMMETER, 2000 A AC/DC, 1000 V AC/DC, 60 MΩExtra robust design from Small is suitable for construction and designed for fall-proof up to 2 m (6.6 ft)Automatic measuring range selection for real effective values (TRMS) for more accuracycat IV 600 V, cat III 1000 V, class 2, double insulationBacklit display for easy reading in low ambient lightMode for detecting inrush currentNon-contact voltage tester integrated in the pliersLoZ mode with low impedance for detecting and eliminating stray voltagesAcoustic continuity measurement, capacitance, diode test, frequency and operating cycle, min/max function, Data storageTest leads for measuring AC/DC voltage, resistance, continuity, frequency, operating cycle, Capacity and for diode testingClamp meter measures AC and DC currentAutomatically turns off after 30 minutes of no use to conserve battery powerDisplay of low battery level and easily accessible battery compartment
- CAT IV 300 V
- 6000 count large-digit LCD
- Basic accuracy better than 0.5%