Measuring accessories
- 440 mA Fast, 1000 V
- Separating capacity 10 kA
- 11 A Fast, 1000 V
- Separating capacity 20 kA
- 10 x 38 mm
- CAT IV 600V, CAT III 1000 V
- Current measurement up to 400 A/AC
- Maximum conductor diameter 32 mm
- Suitable for (details) pH-Meter PH-100ATC, pH-Meter PH-212
- RJ45 port identification
- set of 24 port identifiers (No. 1 to 24)
- Active remote adapters for the wiring test
- Number of the connected remote adapter is shown on the display of the VDV II device
- Supports cable termination for exact length measurement and fault diagnosis
- Optically insulated
- Compatible with (details) VC820, VC830, VC840, VC850, VC870, VC920, VC940, VC960.
- Adheres reliably to almost all surfaces
- Reflective function
- Material-saving application
minimum order quantity:
3 piece
- Compatible with (details) Insulation resistance measuring instrument IT 120
- Earthing measurements
The model BAG-DS-1 is a robust carrying case for the Rigol DS1000 oscilloscopes.
- Unique gripping mechanism facilitates the work of narrow measuring points.
- Output of measured value in mV
- Complete retractable pliers thighs - ideal for measurements in tight places.
- 4 mm probes
- insulating protective caps
- High quality test leads
- 20 coloured single wires with label
- Single wires with pluggable pins
This 4-conductor resistor is especially optimised for the low ohm range. The separate sense connections ensure measurement...
2 meter long uncoiled probe cable for use with device tester Secutest.
pH measuring electrodes are subject to normal wear due to aging. With the replacement electrode, the pH meter can be made ...
• made of die-cast zinc • Dimensions: 75 x 110 mm • Weight: Approx. 70 g • for closures in: Sanitary, electrical, heating,...
- Range 100 pF - 11 111 µF
- Residual capacitance 75 pF
- Max. 250 V (AC/DC)
These measurement range extension adaptors simply plug onto panel meter, Part no. 12 15 41-xx. They are equipped with a ...
0,38 €
available from 10/19/2020
delivery period
(once available)
:
3-4 days
Table charging station for a device battery to optimise the charging time. The charger can charge one battery externally w...
Soot pump, incl. oil; soot flakes; for measuring soot in exhaust gas
The connection cable enables easy connection of the modules via the existing plug-in base.
minimum order quantity:
3 piece
Durable bag made of sturdy polyamide fabric. The Bag enables the safe consumption of the thermal image camera and an addit...
The test adapter is designed in conjunction with test equipment for measuring and testing electrical devices and extension...
- Adapter for connecting a meter with pulse output
- especially small housing
Measuring adapter for three-phase consumers (active, with switchgear independent of the power supply) for the measurement ...
- Stores the print data before printing
- Fast data transmission
- Printout with timestamp
Replacement dirt filter suitable for testo 320.
- Current measurement up to 400 A / AC and 400 A / DC
- Integrated non-contact voltage tester
- 0 - 400 (to 3kHz) (±3.5% +0.5 A)
- Opening range of current clamps 32 mm
- Opening range of current clamps 25 mm
- Optically insulated
- Compatible with (details) Digital multimeters VC820, VC830, VC840, VC850, VC870, VC880, VC920, VC940, VC960
- Phase recognition
- Checks freedom from voltage
- For temperature measurements from 0 - 230 °C
- Extends the multimeter by a temperature measuring range
- Compatible with (details) VC850, VC870, VC880
- Visually insulated
- Compatible with (details) VC880 digital multimeter
- Compatible with (details) VDE 0701/0702 Tester ST 710
- Measuring adapter for three-phase consumers (passive)
Convenient clamp holder for all Fluke TI infrared camera The holder fits all standard tripod screw connections. Now you ca...
111,92 €
available from 10/06/2020
delivery period
(once available)
:
10-14 days
