Data cable, mechanical engineering, industrial equ
- Category 6 (250 MHz)
- Category 6 (250 MHz)
- Category 6 (250 MHz)
- Nummerncode IEC 60332-1-2 High Security, Test voltage 4 kV
- Category 6 (250 MHz)
- Category 6A (500 MHz)
- Category 6A (500 MHz)
Shielded Data cable is used as the Control and Signal line of Electronics for Computer equipment, Electronic and Control e...
- Excellent Power and connection quality for your network.
- With hoods with bend protection, strain relief and locking lever protection.
- Excellent Power and connection quality for your network.
- With hoods with bend protection, strain relief and locking lever protection.
- Category 6 (250 MHz)
- Category 6 (250 MHz)
For the transfer of signals in the mA-range in electronics, in computing systems, control and regulation systems, office m...
- Category 6A (500 MHz)
- double shielded LAN/network cable to connect network components with 2 x RJ45 connectors
- Cat 6 tested
- with 3µ gold plated PINs
- Category 6A (500 MHz)
- Category 6 (250 MHz)
- Category 6 (250 MHz)
- Category 6 (250 MHz)
- Approved.
- Number coded
- For traversing paths up to 10m
Data transfer is performed serially. Basically, the EIB installation consists of sensors = issuers of commands (such as li...
- Excellent Power and connection quality for your network.
- With hoods with bend protection, strain relief and locking lever protection.
- Nummerncode IEC 60332-1-2 High Security, Test voltage 4 kV
- Category 6A (500 MHz)
- EMC-conforming
- Colour-coded
- Excellent Power and connection quality for your network.
- With hoods with bend protection, strain relief and locking lever protection.
- Nummerncode IEC 60332-1-2 High Security, Test voltage 4 kV
- Category 6 (250 MHz)
- double shielded LAN/network cable to connect network components with 2 x RJ45 connectors
- Cat 6 tested
- with 3µ gold plated PINs
- -50 - +180 °C
- For Thermal class H Applications
- Category 6 (250 MHz)
- Best performance and link quality for your network.
- double shielded LAN/network cable to connect network components with 2 x RJ45 connectors
- Cat 6 tested
- with 3µ gold plated PINs
- Category 5e (100 MHz)
maximum order quantity:
25 piece
- unshielded LAN/network cable to connect network components with 2 x RJ45 connectors
- with length indication on the slimline strain relief
- with latch protection
- Overall shielding: foil shielding
- With 3μ gold-plated contact surfaces (PINs)
- Plug with detent
- Category 6A (500 MHz)
- Cast hoods with bend protection and Strain relief
- AWG 26/7
- double shielded LAN/network cable to connect network components with 2 x RJ45 connectors
- Cat 6 tested
- with 3µ gold plated PINs
- Ideal for the PoE-insert
- Extra-short
- 100% copper
- S/FTP (pairs in metal foil & braided shield)
- 4 x 2 x AWG 26/7
- Cast hoods with bend protection and Strain relief
- AWG 26/7
- Overall shielding: foil shielding
- With 3μ gold-plated contact surfaces (PINs)
- Plug with detent
- S/FTP (pairs in metal foil and netting insulation)
- 4 x 2 x AWG 26/7
- Assignment 01:01 according to TIA/EIA 568B
- DIN-colour code
- Smaller outer-Ø
- Excellent Power and connection quality for your network.
- With hoods with bend protection, strain relief and locking lever protection.
- Number coded
- EMC-conforming
- Highly flexible