Stepper motor controls
The intelligent stepper motor iSMIF USB interface is used to connect the stepper motor control cards SMC800 / SMC1500 to t...
USB controlled stepper motor card, to drive 4 stepper motors. While the motor turns you can simultaneously check the statu...
Allows the SMC-1500 stepper motor control card to be addressed with an external stroke and direction signal, even without ...
Programmable GPIO-Logic - 55x digital inputs (with pull-ups) / 55x digital software controlled outputs - TCP/IP Connection...
- 8-axis servo/stepper motor control (step/DIR)
- In addition, Device) can be used as programmable GPIO logic (PoKey USB + Ethernet+LPT interface
- Ideal for CNC machines
The motor driver amplifiers (bipolar current chopper) from 1 to 3 A current phase characterized by micro-step mode, automa...
Optional Fan for use with SMCflex-ME3000 (PN: 19 70 77) for motors with a phase resistance ≤ 1.5 Ω.
Basic module for a variety of expansion options. Thus the Motor Driver Amplifiers SMCflex-ME can be plugged into different...
The motor driver amplifiers (bipolar current chopper) from 1 to 3 A current phase characterized by micro-step mode, automa...
The motor driver amplifiers (bipolar current chopper) from 1 to 3 A current phase characterized by micro-step mode, automa...
With extensive inputs / outputs. TTL, CMOS and 24V compatible Furthermore, there are 3 relay outputs
- Prepared for the Pokeys 57 CNC control
- With the help of cable connection to any CNC control can be used
- Compact design
- Stop current reduction
- Emergency stop input available
- Connection of up to 3 stepper motors
- 4 motor power stages can be plugged
- Working current, standby current and step resolution can be set via software
- 4a motor driver for easy attachment to the SMC-IC4
- 1a motor driver for easy attachment to the SMC-IC4
- 2a motor driver for easy attachment to the SMC-IC4
- 3a motor driver for easy attachment to the SMC-IC4
