Controller cards
- Connections:Front Panel:External 2 x USB 3.0 type A socketInternal 2 x USB 3.0 type A plug with connection cablePCI Express card:External 2 x USB 3.0 type A socketInternal 2 x USB 3.0 type A socket1 x Molex 4-pin power connectorData transfer rates up to:SuperSpeed 5 Gbps,Hi-speed 480 Mbps,Full speed 12 Mbps,Low speed 1.5 MbpsUSB 3.0 cables of the front panel are connected internally to the PCI Express cardLength of internal USB 3.0 Cable: Approx. 60 cm
- Faster 10GbE transmission: Supports 10Gbps transmission speed for bandwidth-intensive high-speed requirementsOther distances with fiber: Fiber optic cables provide significantly greater distances than copper cablesAdvanced performance features: Supports QoS, VLAN, 16K Jumbo frame and can improve network performance and increase efficiency, reliability and security thanks to a large heat sinkImproved CPU and network efficiency: IP, TCP, and UDP checksum offloading checksum processing to the NIC and freeing up CPU resourcesFlexible use: With a PCIe 3.0 x4 interface and supplied flat bracket for most computers and workstation motherboards
- Supports PCIe Gen 3.0x4Supports M.2-SSD in the sizes 22 x 30 mm, 22 x 42 mm, 22 x 60 mm and 22 x 80 mm1x M-Key M.2 socket for PCIe NVMe SSD with M/B&M key connectionCompatible with standard and low profile PCI Express x4, x8 and x16 slotsSimple Plug-and-Play installation
Setup notification
Notification should be active for:
Send notification by e-mail to:
- Compatible with SATA-I, SATA-II and SATA-III hard disks as well as SSD drivesSupplement your PC with 2 external eSATA and 2 internal SATA portsIdeal for fast backups, video games, video editing and other applicationsIt supports transfer speeds up to 6 GB/s and is backward compatible with 3 GB/s and 1.5 GB/s.Supports hot plug and hot swap
- Adds 2 serial ports (RS232) and 1 parallel port (LPT) to your desktop computer Compliant with PCI Express specification REV. 1.1 Single-lane PCI Express with throughput of up to 2.5 Gb/s. SPP, PS/2, EPP and ECP integrated, compatible with IEEE1284 print protocol
- PCIe x4 Lane Host Adapter with USB3.1 PCIe Gen3 x2 fast chipset
- USB bus power USB-C port 5 V 3 A and USB-A 5 V 2 A, total 5 V 5 A
- Supports USB3.1, USB3.0, USB2.0 and USB1.1 devices
Setup notification
Notification should be active for:
Send notification by e-mail to:
- Connections:External 2 x serial RS-232 DB9 connectorInternal 1 x PCI Express x1, V2.0ASIX AX99100 chipsetData transfer rate of up to 230.4 KB/s.FIFO: 256 bytesData bits 5, 6, 7, 8, 9Compatible with 16C950 UARTDim. (LxWxH): Approx. 97 x 51 x 21 mm