EMKO

Emko ESM-3710-N.5.18.0.1/00.00/2.0.0.0 Bang-bang Temperature controller NTC -50 up to 100 °C 16 A relay (L x W x H) 65 x 76 x 35

Digital temperature control device displaying '26 °C'. Markings for Celsius, Fahrenheit, and functions 'SET' and 'P' visible.

4-digit display
2-point temperature control
Heating or cooling function can be selected

Delivery time: 1-2 days

Emko Pronem mini PMI-P-H0/T0 Humidity and temperature measuring transducer pronem mini PMI-P-H0/T0 with 2x 4-20mA analog output

Emko Pronem mini PMI-P-H0/T0 Humidity and temperature measuring transducer pronem mini PMI-P-H0/T0 with 2x 4-20mA analog output

Relative air humidity measuring range 0 to 100%
Measuring range Temperature -20°C to +80°C
Hysteresis

Delivery time: 1-2 days

Emko ESM-3723.5.1.5.0.1/01.01/1.0.0.0 Bang-bang, PID Temperature controller Pt100 0 up to 100 °C 5 A relay (L x W x H) 65 x 76

4-digit temperature display
4-digit display of air humidity
2-point or PID temperature control

Delivery time: 1-2 days

Emko EZM-4435.5.00.0.1/00.00/0.0.0.0 Timer

Emko EZM-4435.5.00.0.1/00.00/0.0.0.0 Timer

6-digit actual value display
6-digit setpoint display
Operation with a time value

Delivery time: 1-2 days

Emko Surface sensor RT-M05-L030-K02.R Sensor type Pt100 Temperature reading range-50 up to 400 °C Sensor diameter 5 mm

A long, grey cable with a rectangular, golden component in the middle and two exposed cable ends on the left side.

Pt100
Measurement range -50°C to +400°C.
3-cable connection

Delivery time: 1-2 days

Emko EMO-700 EMO-700 GPO module No. of relay outputs: 1

A rectangular module bearing the labels 'EMKO' and 'UP'. A long, cylindrical pin protrudes from it.

Output module for expansion of the devices ESM-7750, ESM-7700 or EZM-7750.

Delivery time: 1-2 days

Emko ESM-3712-HCN.8.11.0.1/01.00/2.0.0.0 Bang-bang Temperature controller Pt100 -50 up to 400 °C 16 A relay, 5 A relay

4-digit display
2-point temperature control
Heating or cooling function can be selected

Delivery time: 1-2 days

Emko ESM-1510-N.8.12.0.1/00.00/2.0.0.0 Bang-bang Temperature controller PTC -50 up to 130 °C 5 A relay (L x W x H) 62 x 35 x 90 mm

Temperature controller ESM-1510N with digital display, showing 28.6 °C. Three control buttons below for settings and control.

3-digit display
2-point temperature control
Heating or cooling function can be selected

Delivery time: 1-2 days

Emko ESM-9900.2.20.2.1/00.00/0.0.0.0 Process display

Emko ESM-9900.2.20.2.1/00.00/0.0.0.0 Process display

4-digit process display
Universal measuring input for Pt100, L, J, K, R, S, T, B, E, N, C, 0-50 mV, 0-10 V, 0/4-20 mA
Two-point or multi-point calibration Analogue signals

Delivery time: 1-2 days

available from 28/09/2026

Emko Surface sensor TC-K02.K.SKP5 Sensor type K Temperature reading range-50 up to +400 °C

A silver, braided cable, coiled and with a flat plug at one end, possibly for electrical applications.

-50 to +400°C.Cable length 2 m

Delivery time: 1-2 days

Emko ESM-4930 Bang-bang, P, PI, PD, PID Universal controller Pt100 -200 up to +1700 °C 5 A relay (L x W x H) 86.5 x 48 x 96 mm

Digital counter, black casing. Displays '03421' in red and '002950' in green. Buttons at the bottom for settings and reset.

4-digit process display4-digit setpoint displayUniversal measuring input for Pt100, L, J, K, R, S, T, B, E, N, C, 0-50 mV, 0-10 V, 0/4-20 mA2-point, P, PI, PD or PID controlHeating or cooling function can be selectedControl output relay 5 A.Control output SSRAlarm output relay 5 A.PID self-optimization functionTwo-point or multi-point calibration Analogue signalsSoft start-up.Password protection for program settingsAdjustable temperature offset valuesHysteresis

Delivery time: 1-2 days

Emko EMI-400 EMI-400 GPI module No. of digital outputs: 1

A black module with the inscription 'EMKO' and 'UP' shows an arrow pointing upwards. It has a protruding cylindrical component at the front.

Output module for expansion of the devices ESM-4450.

Delivery time: 1-2 days