JOY-IT

Joy-it JDS6600 Mains-powered 0 Hz - 60 MHz 2-channel Sinus, Triangle, Rectangle, Pulse, Noise, Lorentz curve

(3)

DDS Signal Generator with Display Showing Waveform and Frequency Data. Two Channels, Multiple Control Knobs and Connections.

2-channel signal generator
Waveforms: Sine, square, triangle, pulse, half wave, Noise, Lorentz pulse, exponential rise/fall, CMOS and more
1 channel frequency counter

Delivery time: 3-4 days

Joy-it COM-MOSFET Voltage regulator 1 pc(s) Compatible with (development kits): Arduino

Electronic module with a semiconductor and two blue connector plugs, used for current regulation in circuits.

MOSFET also receives voltage via the SBC if no source voltage is available
Effective voltage can be reduced with PWM
JST plug

Delivery time: 3-4 days

Joy-it sen-color Arduino add-on PCB Black Suitable for (single board PCs) Arduino 1 pc(s)

(1)

Round colour sensor with four transparent LEDs and marked connections on a black circuit board.

With this module, it is possible the composition (red, green, and blue component) of colors.

Delivery time: 3-4 days

Joy-it SBC-LCD16x2 Module 6.6 cm (2.6 inch) 16 x 2 Pixel Compatible with (development kits): Raspberry Pi®, Arduino, Banana Pi

(4)

A blue LCD module with black pixels on a green circuit board. It is frequently used in electronic projects to display text.

HD44780 Industry Standard
compatible to Raspberry, Arduino, Beagle Bone, Banana PI, Cubieboard

Delivery time: 3-4 days

Joy-it SBC-BUCKBOOST01 Voltage regulator 1 pc(s)

(1)

Electronic module with digital display, capacitors, and terminals; numerically displays

Voltage transformer module
Step-UP + Step-down
LM PAPIER 2596& LM2577

Delivery time: 3-4 days

Joy-it JT-TC66C USB multimeter

(3)

A USB voltmeter displays 0 V and 0 A on a digital screen, with additional diagrams and icons for charging status and measurement data.

USB type C, 3.0 volt/ammeter
OLED color display
Quick Charge detection

Delivery time: 3-4 days

Joy-it Armor Case BLOCK ACTIVE SBC housing Compatible with (development kits): Raspberry Pi® Active cooling Black

(9)

Joy-it Armor Case BLOCK ACTIVE SBC housing Compatible with (development kits): Raspberry Pi® Active cooling Black

Massive protection of the board against heat and impacts
CNC milled aluminum
The required space volume of the Pi remains the same

delivery as soon as available

Joy-it RB-CB1-025 Jumper cable Raspberry Pi® [13x Wire jumper socket - 13x Wire jumper socket] 30.00 cm Multi-coloured Pins

(3)

Joy-it RB-CB1-025 Jumper cable Raspberry Pi® [13x Wire jumper socket - 13x Wire jumper socket] 30.00 cm Multi-coloured Pins

Connects the Raspberry P® to self-made circuit boards
Convertable from female to male

Delivery time: 3-4 days

Joy-it RB-TFT1.8 Module 4.6 cm (1.8 inch) 160 x 128 Pixel Compatible with (development kits): Raspberry Pi®, Arduino, BBC

(4)

A small electronic chip with multiple connection pins and a blue surface displaying the 'joy-it' lettering.

262,000 colors
resolution 128 x 160

Delivery time: 3-4 days

Joy-it SBC-MotoDriver2 Development board 1 pc(s)

(1)

Red engine control module with multiple connection terminals, two silver capacitors, and a black heatsink on top.

5 to 35 V, power: Max. 25 watts

Delivery time: 3-4 days

Joy-it RD6012 Bench PSU (adjustable voltage) 0 - 60 V 0 - 12 A remote controlled, programmable, slim type

(1)

Electronic DC power supply with digital display showing '5.00V', '2.00A', '10.00W'. Keypad below, connections bottom right.

Input voltage up to 70 VoltOutput voltage up to 60 V/12 ABattery charging functionValue input via keypadAdjustable over current protectionOvervoltage protection adjustable

Delivery time: 3-4 days

Joy-it JT-OMS01 Oscilloscope, Signal generator, Multimeter 2-channel

(1)

Portable digital oscilloscope and multimeter with display showing a waveform; buttons for measurement modes and controls visible.

Discover the ultimate tool for electronics enthusiasts and professionals – our 3-in-1 handheld oscilloscope! With this ver...

Delivery time: 3-4 days