KNIPEX

Knipex Alligator 88 01 250 Pipe wrench Spanner size (metric) 46 mm 250 mm

(16)

More performance and comfort in comparison to conventional water pump pliers of the same length: 9-stage snap-in adjustment for 3% more gripping capacity
Good access to the workpiece by slim design in the head and joint area
Self-locking on pipes and nuts: no slipping on the workpiece, low handforce required

Delivery time: 3-4 days

Knipex 92 95 89 Soldering tweezers 160 mm

(7)

A silver pair of pliers with narrow, long tips, suitable for precision work. On the pliers it reads: 'Knipex 02 05 09'.

For holding small parts without finger pressure.
Good grip.
Spring steel, chrome-plated

Delivery time: 3-4 days

Knipex 77 42 130 Electrical & precision engineering Side cutter flush-cutting 130 mm

(4)

Side cutters with red and blue handles, metal head and the inscription 'Knipex'.

Precision pliers for very fine cutting work such as electronics and precision engineering.
Load optimized design for a more direct work feeling
Stable box joint free from play

Delivery time: 3-4 days

available from 03/09/2026

Knipex Twistor16 97 53 18 Crimper Ferrules 0.14 up to 16 mm²

(3)

For pressing of wire end sleeves DIN 46228 Part 1 + 4
Square crimping profile, large capacity range of ,14 up to 16mm²
36° rotating crimp insert with 8tangible positions

Delivery time: 3-4 days

Knipex 81 11 250 Siphoning pliers 250 mm 1 pc(s)

(6)

Siphon tweezer with 25-fold adjustable, through streckten joint. With fine adjustment for optimum adjustment to different ...

Delivery time: 3-4 days

Knipex 92 28 69 ESD Precision tweezers Pointed, robust 120 mm

(3)

Stainless steel tweezers with pointed tips. Side inscription: 'Knipex 92 28 69 ESD, Stainless Steel'.

Chrome/nickel steel: stainless steel, anti-magnetic (18/1), very common electronics
ESD coating: Anti-glare black, with a surface resistance of approx. 1 ⁵ Ohm
Anti-glare, brushed tips.

Delivery time: 3-4 days

Knipex 79 32 125 Electrical & precision engineering Side cutter non-flush type 125 mm

(2)

Head tip

Delivery time: 3-4 days

Knipex 99 11 250 Kraft mechanic's nipper 250 mm 1 pc(s)

(7)

To lace concrete reinforcing steel with binding wire from a roll
Wire is twisted and cut in a single pass
High-leverage joint, minimising strain, even when thick binding wires are used

Delivery time: 3-4 days

Knipex 90 20 185 Cable jacket cutter Suitable for (cable stripping) Plastic trunking, Jackets 25 mm

(4)

Red plastic pipe cutter with the inscription 'nur / only Plastic'. Suitable for pipes up to 25 mm in diameter. Manufactured in Germany.

For cutting thin-walled plastic tubes (e.g. Plastic penstock pipes) and hoses, also fabric-strengthened, of plastic and rubber up to a diameter of 25 mm outer diameter
Not suitable for cutting cables
With opening spring and locking device

Delivery time: 3-4 days

Knipex 97 62 145 A Crimper Ferrules 0.25 up to 2.5 mm²

(11)

For crimping of cable end sleeves DIN 46228 part 1 + 4 within the range of 0.25 to 2.5 mm ² Pressing operation in characte...

Delivery time: 3-4 days

Knipex Cobra QuickSet 87 21 250 Pipe wrench Spanner size (metric) 46 mm 250 mm

(5)

Red water pump pliers with grey handle, suitable for plumbing work. 'Self-locking' marking on the handle.

Fully open, sliding it grabs!
Additional fast adjustment to the work piece through the buck
Connects the tried-and-tested, secure locking of hinge bolt with an additional sliding feature, working in narrow and inaccessible areas of work easier

Delivery time: 3-4 days

Knipex 70 06 140 VDE Side cutter non-flush type 140 mm

(14)

A cable cutter cuts through a black cable. The pliers have the inscriptions '1000V', 'Germany' and 'Made in Germany' visible.

The indispensable side-cutter for versatile use High-quality material and precise finish for a long shelf life. Precision ...

Delivery time: 3-4 days