KNIPEX

Knipex 03 01 160 Workshop Comb pliers 160 mm DIN ISO 5746

(14)

With gripping zones for flat and round material, suitable for versatile use
With cutting edges for soft and hard wire
Long cutting edges for thicker cables

Delivery time: 3-4 days

Knipex 41 14 250 Gripper Semi-circle 0 - 36 mm 250 mm

(8)

Hold round, profile and flat material securely Heavy duty model With adjustment screw and release lever One-hand operation...

Delivery time: 3-4 days

Knipex Super-Knips 78 71 125 ESD ESD Print pliers flush-cutting 125 mm

(10)

Pliers with grey and black handle, marked as Knipex, suitable for copper wires up to 1.6 mm and iron wires up to 1.2 mm.

Precision pliers for ultra-fine cutting work e.g. in electronics and precision mechanics.
Handles Electrically discharging design - dissipative
Ground, very sharp cutting edges without facet

Delivery time: 3-4 days

Knipex 74 02 250 Workshop Kraft side cutter non-flush type 250 mm

(29)

Red and blue-handled wire cutters labeled 'Chrom-Vanadin cap. Piano ⌀3.0 mm', designed for cutting robust wires.

For heavy-duty, continuous use
High cutting power with low application of force through optimum matching of cutting angle and transmission ratio
Precision cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC) for all sorts of wire, including piano wire

Delivery time: 3-4 days

Knipex 97 40 10 IDC tools Suitable for UTP data cables, STP data cables, LSA PLUS 0.4 up to 0.8 mm

(5)

A pair of pliers clamps wires into an electrical connection module. Various cable ends are exposed and laid out side by side.

For the stripping outer sheath, shielding and insulation in one step

Delivery time: 3-4 days

Knipex 02 06 180 VDE Kraft comb pliers 180 mm DIN ISO 5746, DIN EN 60900

(7)

35 % less effort required than with conventional combination pliers
Easier work due to optimised leverage
Wwith cutting edges (hardness approx. 63 HRC) for soft and hard wire and piano wire

Delivery time: 3-4 days

Knipex 92 94 91 Soldering tweezers Trapezoidal 160 mm

(7)

Silver precision tweezers with a textured surface and curved end, suitable for delicate work and precise handling.

For holding small parts without finger pressure.
Good grip.
Spring steel, chrome-plated

Delivery time: 3-4 days

Knipex 26 25 200 Electrical & precision engineering Round nose pliers 40-degree Vanadium electric furnace steel 200 mm

(4)

Red and blue pointed pliers with angled gripping surfaces and a knurled handle, suitable for precise gripping and cutting work.

Elastic tips: dimensionally stable even when twisted
Distortion-tolerant, elastic precision tips
Half-round, long, pointed jaws

Delivery time: 3-4 days

Knipex 35 42 115 ESD ESD Needle nose pliers 45-degree 115 mm

(1)

Pointed pliers with a black handle, suitable for precise work in electronics. '35 42 115 ESD' marking visible on the handle.

Precision pliers for fine assembly work, e g. in electronics and fine mechanics
For gripping, holding and bending
Electrically discharging handles - dissipative

Delivery time: 3-4 days

Knipex 02 02 180 Workshop Kraft comb pliers 180 mm DIN ISO 5746

(7)

A red pliers cuts a green cable. The pliers have serrated gripping surfaces.

35 % less effort required than with conventional combination pliers
Easier work due to optimised leverage
Wwith cutting edges (hardness approx. 63 HRC) for soft and hard wire and piano wire

Delivery time: 3-4 days

Knipex 97 49 04 Crimp inset Non-insulated open end connectors Suitable for (pliers) 2.8/4.8 mm connector width 0.1 up to 2.5 mm²

(6)

Two metal blades with serrated edges and numbered markings, presumably parts of a specific tool or device for precision work.

Application: Non-insulated, open connector (2.8 + 4.8 mm plug width) 0.1 - 2.5 mm²

Delivery time: 3-4 days

Knipex 811950 1 pc(s)

(1)

A silver square-headed key tool with a chain attachment and red adapter. Used for opening technical locks.

For window and door handles
For heating ventilation, chimney flaps, etc.

Delivery time: 3-4 days