ACV

ACV 621094-29-1 Car stereo bracket

Car stereo installation kit with black dash kit, metal mounting brackets, wiring harnesses, antenna adapter, and control module on a white background.

The 2-DIN format fits in standard radio installation openings with double height and enables the secure mounting of retrofit car radios in compatible car dashboards. The rectangular cage geometry ensures stable alignment in the dashboard, simplifies installation and ensures the correct fit in the panel. The black factory paint reduces the visible contrast behind the aperture and contributes to a harmonious integration into the vehicle interior. The vehicle-specific compatibility minimizes the adaptation effort of the installation in commercial vehicles and transporters and reduces the installation time.

Delivery time: 3-4 days

ACV 1441-03 Preamp adapter

ACV 1441-03 Preamp adapter

Pre-amplifier adapter Mini ISO to 5 gold-plated phono sockets for all BECKER devices with subwoofer output

Delivery time: 3-4 days

ACV 344340-1-0-p U terminal Hole Ø=4.4 mm Partially insulated Red 1 pc(s) Piece

Red

Delivery time: 3-4 days

ACV Steering wheel control interface

Car audio wiring harness kit with multiple color-coded connectors, loose wires, and a small black control module labeled 'acv'.

The steering wheel remote control interface converts the signals from the vehicle steering wheel into signals from retrofit car radios, thus allowing the factory control elements to be retained during audio upgrades.
The ISO-adapter format offers a standardized connection pattern, WAS simplifies the installation and reduces the vehicle-specific wiring effort.
The vehicle-specific compatibility assignment ensures the correct pin assignment for supported Toyota models and thus contributes to a precise signal transmission and a fault-free operation.

Delivery time: 3-4 days

ACV Car antenna adapter DAB/FM splitter 15-7561004

Black electronic control module with cable and white connector, featuring three blue circular ports on a plain white background.

The Fakra(m) to Fakra(m) connection allows direct connection between vehicle antenna and receiver, simplifies installation and minimizes the need for additional adapters.
The split arrangement separates DAB+ and FM/AM signals to support simultaneous signal transmission for multi-band reception over a single antenna circuit. The compact design enables an inconspicuous mounting in cramped spaces and reduces the interference in cable harnesses and dashboard areas. The cable design is optimized for stable reception and thus ensures an uninterrupted DAB+ audio transmission while driving.

Delivery time: 3-4 days

ACV 281250-11 Car stereo DIN faceplate Compatible with: Renault

(1)

Grey rectangular plastic frame with multiple cutouts, presumably for installing a car radio in a vehicle dashboard.

Radio-beaming 1-DIN many car manufacturers use their own vehicle-specific radios, which are optically adapted to the cente...

Delivery time: 3-4 days

while stocks last

ACV 1810-01 Entriegelungsbügel

Two metal clips with the inscription 'TOP L' and 'TOP R', lying side by side.

BECKER unlocking clip Contents: 2 pieces

Delivery time: 3-4 days

ACV Car LCD monitor 7 inch

Black AHD monitor display showing '1080P x 720P' on a mounting stand.

The 16:9 AHD TFT picture format offers a wide-screen format, which improves the situation perception in the monitoring of rear or outside recordings. The pedestal with suction-cup fixing enables the temporary placing on smooth surfaces for a quick setup and re-positioning. Thanks to universal compatibility, it is possible to connect to a variety of vehicle camera systems for different installation scenarios. The compact diagonal display can be placed in the dashboard or in the headrest and only has a minimal impact on the passenger compartment.

Delivery time: 3-4 days

ACV 771000-6052 Reversing camera system Black

Red rear bicycle light with two side LEDs and a central lens on a white background.

The compact casing of the rear-view camera enables a flat mounting and a clean installation. The compatibility with vehicle systems permits the integration into existing parking aids and thus its use in different vehicle models. The black surface reduces visual impairment at the rear of the vehicle and enables unobtrusive placement. Thanks to Plug-and-Play connection the cabling is simplified and the installation time is shortened.

Delivery time: 3-4 days

ACV 621320-10-1 Car stereo bracket

Car stereo installation kit with metal mounting brackets, wiring harnesses, adapter, and antenna cable on a white background.

The 2-ISO-mounting frame format offers a standardized mounting surface and simplifies the installation of single-DIN car radios in compatible dashboard.
The precise rectangular geometry ensures that the retrofit radio is correctly aligned with the factory opening, reducing the reworking or the use of additional brackets during installation.
The black factory color fits perfectly with the OEM interior and minimizes optical differences after installation.

Delivery time: 3-4 days

ACV 57-1213 ISO car radio cable Compatible with: Nissan

Multi-coloured cable assemblies with connectors at both ends for connecting electronic devices.

T-Cable Set T-Cable sets allow power and/or speaker wiring to be pulled out of the radio harness on the vehicle without da...

Delivery time: 3-4 days

ACV Speaker cover Black (L x W) 1400 mm x 700 mm 1 Rolls

A roll of black felt fabric, partially unrolled on a white background.

Cover fabric self-adhesive 70x140 cm black

(1 m² = CHF 13.62)

Delivery time: 4-6 days