PFERD TOOLS

PFERD TOOLS Inner brush IBU 25100 MES 0,15 43679262 10 pc(s)

Cleaning brush with a metal handle and brown bristles, perfect for cleaning bottles or narrow openings.

Especially suitable for brushes in the hand use. Drive types: - Manual insert Uses: - Deburr- Clean- Remove oxide layers M...

Delivery time: 7-10 days

PFERD TOOLS 64172180 Abrasive fibre disc Diameter 180 mm Grit size=24 25 pc(s)

A round, red sanding attachment with a central opening and four notches.

- Max. RPM 8500 RPM
- Ø hole: 22 mm
- ABRASIVES: CO-COOL-PLUS

Delivery time: 7-10 days

PFERD TOOLS Brush PBU 1010/6 MES 0,30 43204002 10 pc(s)

Metal brush with a cylindrical shaft and dense wire bristles, suitable for polishing work.

Suitable for easy brush work such as deburring, cleaning and removing rust. Drive types: - Flexible shaft drive- Drill- St...

Delivery time: 7-10 days

PFERD TOOLS 44656280 Grinding bit Diameter 60 mm 10 pc(s)

A rust-brown grinding cylinder with a silver rod, suitable for surface treatment and polishing, against a white background.

The sanding fleece is arranged on top of each other in circular areas (Axial). Since the individual nonwovens are not con...

Delivery time: 7-10 days

PFERD TOOLS PR 0925 CO-COOL 120 42810850 Sandpaper roll Grit size 120 (Ø x H) 9 mm x 25 mm 50 pc(s)

A red, structured textile fabric, thin and rolled cylindrically, with a crinkled, natural appearance.

For aggressive grinding with the highest surface removal rate on hard, low-heat-conducting materials. Constant high perfor...

Delivery time: 7-10 days

PFERD TOOLS 25203671 SPB DIN 338 HSSG N 6,9 STEEL HSS-G N Twist drill bit 6.9 mm Total length 109 mm DIN 338 10 pc(s)

Metal drill bits with spiral grooves, ideal for drilling into hard materials.

Universally suitable for steel, cast steel, cast iron, cast iron, bronze, Brass, aluminum
Easy centering
Long tool life

Delivery time: 7-10 days

PFERD TOOLS BA 40/820 CO-COOL 80 45000218 Sandpaper belt set Grit size 80 (L x W) 820 mm x 40 mm 10 pc(s)

Red sanding belts, bundled, in a curved arrangement. Used for belt sanders in woodworking or metalworking.

High tensile strength and optimum flexibilityConsistent work results through very good grain adhesionHigh economic efficiency thanks to high grinding performance and service life

Delivery time: 7-10 days

PFERD TOOLS 22395453 Burr Length 33.5 mm Product size (Ø) 14 mm Working length 3.5 mm Shank diameter 3 mm

A silver milling cutter with a conically shaped, sharp head, suitable for precise metalworking and grinding tasks.

Tools specially designed for fine cutting. Available in special teeth, 12 different milling pin shapes and dimensions, sha...

Delivery time: 7-10 days

PFERD TOOLS 44638280 Round for marble sink Diameter 50 mm 100 pc(s)

Brown, oval pot scrubber made from scratch-free material with a rough texture for cleaning delicate surfaces.

Special tools for marbling surfaces. Drive types: - Flexible shaft drive- Stator drill- Straight grinder Uses: - Roughing-...

Delivery time: 7-10 days

PFERD TOOLS 21460005 Burr Length 79.5 mm Product size (Ø) 10 mm Working length 3 mm Shank diameter 6 mm

Metal hand tool with a long shaft, dark ribbed handle on one end, and a larger silver cylindrical head on the other, shown on a white background.

- RPM of, hardened tempered steels over 1,200 N/mm²: 11000 RPM
- RPM of, hard non-ferrous metals: 11000 RPM
- RPM of, high-temperature materials: 11000 RPM

Delivery time: 7-10 days

PFERD TOOLS DR D14X8 98988203 Chisel damping ring 1 pc(s)

Black rubber ring-shaped gasket or O-ring on a white background.

Reduces vibration and volume

Delivery time: 7-10 days

PFERD TOOLS PWA 2-120 HV 80205037 Pneumatic angle grinder 230 W

Pneumatic screwdriver with blue handle, lever at the top and black cable on the right side. Used for efficient screwing.

No dust on the workpiece sideThanks to the collet chuck holder, it is optimally suitable for the recommended shank toolsSafe working by dead man switching

Delivery time: 7-10 days