PHAETUS

Logo
A 3D printer extruder with a black metal design, featuring a heatsink, cooling fan, and nozzle. It is capable of reaching 320°C.
  • 0.4 mm silicon carbide nozzle
  • EndCoat™ Heat Break (Thermal Bridge)
  • Copper-coated heat block (Copper Coated Heat Block)
CHF 40.15
VAT included
plus
Delivery time: 2-3 weeks
in the inflow
Black and copper industrial component with a ribbed copper top and a black housing, shown isolated on a white background.
  • Compatible with Flashforge Adventure 5M / 5M Pro
  • High-flow pressure up to 43 mm³/s.
  • Change of nozzle in 30 seconds
CHF 26.95
VAT included
plus
Delivery time: 4-5 weeks
in the inflow
A 3D printer extruder with multiple fins and wires, designed to heat and deposit filament.
  • 0.4 mm silicon carbide nozzle
  • EndCoat™ Heat Break (Heat Interruptor/Thermal Brake)
  • Copper-coated heat block (Copper Coated Heat Block)
CHF 43.50
VAT included
plus
Delivery time: 3-4 days
in stock
3D printer hotend with yellow warning label 'CAUTION HOT' and heat symbol on a black nozzle assembly.
  • EndCoat Ultra – Wear-resistant coating
  • Higher durability
  • Copper heat block (up to 500°C)
CHF 27.95
VAT included
plus
Delivery time: 4-5 weeks
in the inflow
Close-up of a metal threaded nozzle or jet, marked '80', with a hex base and tapered tip on a white background.
  • High wear resistance
  • High temperature strength
  • Optimum temperature distribution
CHF 71.95
VAT included
plus
Delivery time: 2-3 weeks
in the inflow
A 3D printer extruder nozzle with heat sink and wiring visible, designed for precise filament extrusion in a 3D printing setup.
  • 0.6 mm silicon carbide nozzle
  • EndCoat™ Heat Break (Thermal Bridge)
  • Copper-coated heat block (Copper Coated Heat Block)
CHF 43.50
VAT included
plus
Delivery time: 2-3 weeks
in the inflow
A black 3D printer nozzle assembly with a heat sink design; marked with a '320°' symbol, indicating its temperature tolerance.
  • 0.6 mm EndCoat™ nozzle
  • Titanium alloy heat break (heat breaker/thermal brake)
  • Copper-coated heat block (Copper Coated Heat Block)
CHF 27.25
VAT included
plus
Delivery time: 3-4 days
in stock
Close-up of a copper-and-black cylindrical mechanical component, shown isolated on a white background.
  • Compatible with Flashforge Adventure 5M / 5M Pro
  • High-flow pressure up to 43 mm³/s.
  • Change of nozzle in 30 seconds
CHF 26.95
VAT included
plus
Delivery time: 4-5 weeks
in the inflow
A 3D printer nozzle assembly with a black heat sink and nozzle tip. The heat sink is designed to cool the nozzle operating at 320 degrees Celsius.
  • 0.6 mm silicon carbide nozzle
  • EndCoat™ Heat Break (Heat Interruptor/Thermal Brake)
  • Copper-coated heat block (Copper Coated Heat Block)
CHF 40.15
VAT included
plus
Delivery time: 2-3 weeks
in the inflow
A kit featuring a thermal grease packet, a small metal component, and a pair of white plastic rods with attached wires.
This is a set of ceramic heating cartridge and thermistor for hot ends from Phaetus for Bambu Lab P1P/P1S 3D printers.
CHF 11.65
VAT included
plus
Delivery time: 3-4 days
in stock
Copper-and-black electrical component with a ribbed copper top and black insulated base, shown isolated on a white background.
  • Compatible with Flashforge Adventure 5M / 5M Pro
  • High-flow pressure up to 43 mm³/s.
  • Change of nozzle in 30 seconds
CHF 29.95
VAT included
plus
Delivery time: 4-5 weeks
in the inflow
Black plastic clip or cover with a heat warning symbol and '320°' embossed on the front.
  • For Phaetus Conch Hotends
  • Temperature resistant:
  • Non-stick coating
CHF 3.20
VAT included
plus
Delivery time: 4-5 weeks
in the inflow