MEAN WELL

MW Mean Well ELG-100-24B-3Y LED transformer, LED driver Constant voltage, Constant current 96 W 4 A 12 - 24 V DC 3-in-1 dimmer

MW Mean Well ELG-100-24B-3Y LED transformer, LED driver Constant voltage, Constant current 96 W 4 A 12 - 24 V DC 3-in-1 dimmer

Constant voltage, Constant current
12 - 24 V DC
4 A

Delivery time: 1-2 days

available from 01/09/2026

MEAN WELL SDR-480-24 Rail mounted PSU (DIN) 24 V DC 20 A 480 W No. of outputs:1 x Content 1 pc(s)

(1)

A switched-mode power supply marked 'Mean Well SDR-480-24', 480W, output 24V/20A. Mounted on a metal rail.

Direct assembly on DIN Rail · Enclosed case, Touch-guard screw terminals · Universal input · Overload protection, current ...

Delivery time: 1-2 days

MW Mean Well RS-15-24 SMPSU 24 V DC 0.625 A 15 W

(11)

Compact power supply unit with a perforated metal casing and black connection terminals, suitable for electronic devices and applications.

Output 24 V DC / 0.625 A
Power 15 W
Screw terminal

Delivery time: 1-2 days

MEAN WELL DRP-03 DIN mount Compatible with MW Mean Well

(1)

'Mean Well DRH-120-24' DIN rail power supply, input 340–550VAC, output 24VDC, 5A, mounted on metal bracket, certifications printed below.

DIN-rails retaining clip with screw fastening for universal use.

Delivery time: 1-2 days

MEAN WELL NDR-120-48 Rail mounted PSU (DIN) 48 V DC 2.5 A 120 W No. of outputs:1 x Content 1 pc(s)

(4)

A Mean Well switched-mode power supply (Model NDR-120-24) mounted on a DIN rail, with 24V output voltage, 120W power rating.

Switching power supply in closed design, directly mountable on DIN rail with an input voltage range of 90-264 V/AC.

Delivery time: 1-2 days

MEAN WELL DDR-30G-5 Rail mounted DC/DC converter (DIN) 5 V DC 6 A 30 W No. of outputs:1 x Content 1 pc(s)

(2)

A black DIN rail power supply with technical specifications mounted on the front of a metal rail.

For DIN rail mounting. · Can be used on DIN-rail TS-35/7.5 or 15 can be installed · Width of only 35 mm · Wide input voltage range 4:1 · No minimum load required · Regulated output voltage (±10%) · Cooling by free air convection · Input/output insulation 4000 V · Protection: short circuit, overload, over voltage, input polarity, input under voltage protection

Delivery time: 1-2 days

MEAN WELL HLG-320H-C1050A LED driver Constant current 320.25 W 525 - 1050 mA 152 - 305 V DC Suitable for flammable surfaces

(13)

MEAN WELL HLG-320H-C1050A LED driver Constant current 320.25 W 525 - 1050 mA 152 - 305 V DC Suitable for flammable surfaces

Independent operating device · Universal input · Metal housing · Constant current · IP65, constant current adjustable via internal potentiometer · Overload protection through current limitation, auto recovery · Protected against short circuit, overload, over voltage · Built-in PFC circuit · For LED lighting applications · Typical life over 62,000 hours

Currently not available

MEAN WELL DDR-60L-12 Rail mounted DC/DC converter (DIN) 12 V DC 5 A 60 W No. of outputs:1 x Content 1 pc(s)

(2)

A DIN rail power supply, model 'DDR-60L-24'. Input: 18-75VDC, Output: 24VDC, 2.5A. Black housing with text details.

For DIN rail mounting. · Can be used on DIN-rail TS-35/7.5 or 15 can be installed · Only 52.5 mm width · Wide input voltage range 4:1 · No minimum load required · Regulated output voltage (±10%) cooling by free air convection · Input/output insulation 4000 V · Protection: short circuit, overload, over voltage, input polarity, input under voltage protection

Delivery time: 1-2 days

MW Mean Well RS-150-12 SMPSU 12 V DC 12.5 A 150 W

(11)

Metallic switch-mode power supply with ventilation slots and black connection area. Yellow warning label on the top surface.

Output 12 V DC / 12.5 A
Power 150 W
Screw terminal

Delivery time: 1-2 days

Mean Well HLG-40H-36B LED driver, LED transformer Constant voltage, Constant current 40 W 1.12 A 21.6 - 36 V DC dimmable, PFC

(4)

Mean Well HLG-40H-36B LED driver, LED transformer Constant voltage, Constant current 40 W 1.12 A 21.6 - 36 V DC dimmable, PFC

Output 21.6 - 36 V DC/1.12 A
Constant voltage, Constant current
40 W Power

Currently not available

MEAN WELL SD-100A-12 DC/DC converter 12 V DC - 12 V DC/8.5 A 102 W

(1)

A rectangular metallic power supply unit with ventilation slots and multiple connections on the right-hand side.

Complies with railway standard EN50155, EN45545-2 and IEC60571
Galvanic isolation of input and output
Suitable for harsh and very dusty environments with high vibrations and extreme temperatures

Delivery time: 1-2 days

Mean Well GS06E-5P1J Mains PSU (fixed voltage) 18 V DC 330 mA 6 W

(4)

Mean Well GS06E-5P1J Mains PSU (fixed voltage) 18 V DC 330 mA 6 W

For appliances with power ratings of up to 330 mA;6 W;5.5/2.1 coaxial connector;Synchronised

Currently not available