MEAN WELL

Logo
Price
Category
Input voltage (max.)
Type
Category
Max. output current
Connection
Output voltage (max.)
Min. input voltage
Rating
MEAN WELL ELG-100-24AB-3Y LED driver Constant voltage 96 W 2 - 4 A 21.6 - 26.4 V DC 3-in-1 dimmer, Suitable for flammable
  • Constant voltage · Independent operating device · Metal housing · Wide-range input · Overload protection through current limitation, auto recovery · Protected against short circuit, overload, overvoltage, overheating · Built-in PFC circuit · Suitable for LED lighting applications · SELV compliant · Safety Standards: EN 61347-1, EN 61347-2-13 and other · Emc Standards: EN55015, EN61000-3-2 Class C, EN 61000-3-3, EN61547 and other · Corresponds to 6 kV surge immunity level · IP65, output voltage and current limitation via internal potentiometer on the bottom of the housing can be set, dimming via running control cable, 3 in 1 dimming function (0...10 V DC, PWM, 100k ohm potentiometer) · In the primary cable running protective conductor
CHF 34.50
VAT included
plus
Delivery time: 3-4 days
in stock
A rectangular metal enclosure with a honeycomb pattern, showing the electronic components of a power supply unit, visible through the cover.
  • Closed design (U-bracket) · Universal input · Slim and thin profile (31 mm) · Fanless design, 500 W convection · Overload protection through current limitation, switching off after 5 s · Built-in PFC circuit · 150% peak load capacity (100 ms) · Protected against short circuit, overload, overvoltage, overheating · Operating altitude up to 5000 m · LED display for switching on · EN60335-1, EN 6158-2-16
CHF 95.05
VAT included
plus
Delivery time: 3-4 days
in stock
A black, rectangular AC/DC adapter with the label 'IRM-02-12' on the top surface. Used for power supply.
  • Closed design, PCB mounting
  • Protected against short circuit, overload and excess temperature
  • Cooling by natural convection
CHF 5.10
VAT included
plus
Delivery time: 3-4 days
in stock
LED Driver, Model HLG-320H-12A, Input 100-240V, 50/60Hz, 4A; Output 12V, 22A. Weatherproof, IP65. Suitable for outdoor lighting.
  • Output 18 - 36 V DC/8.9 A
  • Constant voltage, Constant current
  • 320 W Power
Currently not available
There is already a notification for this product.
Compact power supply unit with a perforated metal casing and black connection terminals, suitable for electronic devices and applications.
  • Output /
  • Power 9.9 W
  • Screw terminal
CHF 7.60
VAT included
plus
Delivery time: 3-4 days
in stock
Black power supply with technical specifications and safety signs on the top surface. Suitable for use in electronic devices.
  • 8.3 A
CHF 44.45
VAT included
plus
Delivery time: 3-4 days
in stock
A switched-mode power supply from MW Mean Well, Model DDR-120D-12, mounted on a DIN rail. Input range: 67.2-154VDC; Output: 12V, 10A.
  • For DIN rail mounting. · Can be used on DIN-rail TS-35/7.5 or 15 can be installed · Width of only 32 mm · 2:1 input voltage range · 150% peak load capacity · Regulated output voltage · Cooling by free air convection · Input/output insulation 4000 V · Protection: short circuit, overload, over voltage, input polarity, input under voltage protection
CHF 56.10
VAT included
plus
Delivery time: 3-4 days
in stock
A black power supply mounted on a metal rail. Labelling shows input and output voltage of 18-75VDC and 24VDC.
  • For DIN rail mounting. · Can be used on DIN-rail TS-35/7.5 or 15 can be installed · Only 52.5 mm width · Wide input voltage range 4:1 · No minimum load required · Regulated output voltage (±10%) cooling by free air convection · Input/output insulation 4000 V · Protection: short circuit, overload, over voltage, input polarity, input under voltage protection
CHF 38.90
VAT included
plus
Delivery time: 3-4 days
in stock
MEAN WELL NID100-12 DC/DC converter 7.5 A 90 W No. of outputs: 1 x Content 1 pc(s)
  • Open type (open frame) · Wide input voltage range · High efficiency up to 97% · Switching the output voltage on and off via remote signal · For direct PCB mounting · Protected against short circuit, overload, overvoltage · Cooling by free air convection · Meets the EN55032 ClassA without additional components
CHF 12.05
VAT included
plus
Delivery time: 3-4 days
in stock
Electronic switched-mode power supply module with various components such as capacitors and inductors mounted on a printed circuit board.
  • Open design (open frame) · Compact design, 3'' x 2'' · Pin strip connections for nylon crimp connectors · Universal input · Overload protection by switching off, auto recovery · Protected against short circuit, overload, over voltage · Low idle power
Currently not available
There is already a notification for this product.
MEAN WELL LCM-60KN LED driver Constant current 60.3 W 500 - 1400 mA 2 - 90 V DC dimmable 1 pc(s)
  • Independent operating device · Plastic housing · Constant current can be selected via DIP switch · KNX interface · Integrated KNX push button · Overload protection through current limitation, auto recovery · Protected against short-circuit, overheating, over-voltage · Built-in PFC circuit · For LED lighting applications · Safety Standards: EN 61347-1, EN 61347-2-13 and other · Emc Standards: EN 61000-3-2, Class C, EN55015, EN61547 and other · SELV compliant · KNX and push dimming, standby power consumption less than 0.5W
CHF 49.25
VAT included
plus
Delivery time: 3-4 days
in stock
A silver power supply with the inscription 'HLG-240H-15A' by MEAN WELL, displaying technical specifications and IP65 protection class.
  • Output 54 V DC/4.45 A
  • Constant voltage, Constant current
  • 240 W Power
CHF 64.00
VAT included
plus
Delivery time: 3-4 days
in stock