MEAN WELL

MEAN WELL MDR-60-12 Rail mounted PSU (DIN) 12 V DC 5 A 60 W No. of outputs:1 x Content 1 pc(s)

(7)

'Mean Well' power supply MDR-60-12 mounted on DIN rail, provides a DC output of 12V/5A with an input voltage of 100-240VAC.

Direct assembly on DIN Rail · Enclosed case, Touch-guard screw terminals · Universal input · Overload protection, current ...

Delivery time: 1-2 days

DC/DC LED driver Mean Well LDB-350LW 2-32 V 500 mA 14 W 1 pc(s)

DC/DC LED driver Mean Well LDB-350LW 2-32 V 500 mA 14 W 1 pc(s)

DC/DC-Buck-Boost-converter with constant current output and wide input voltage range of 9-36V/DC. Suitable for driving ill...

Delivery time: 1-2 days

MEAN WELL HDR-150-24 Rail mounted PSU (DIN) 24 V DC 6.25 A 150 W No. of outputs:1 x Content 1 pc(s)

Black DIN rail power supply module, model number 'HDR-150-24', input range 85-264VAC, output 24V at 6.25A.

Directly on the DIN-rail mountable · Closed design, touch-proof screw terminals · Universal input · Overload protection through current limitation, auto recovery · Protected against short circuit, overload, over voltage · Low idle power · LED display for power-on · Insulation category II

Delivery time: 1-2 days

MW Mean Well PWM-120-24 LED driver, LED transformer Constant voltage, Constant current 120 W 5 A 24 V DC dimmable, PFC circuit

(3)

Dust-tight, waterproof power supply unit. Rectangular housing with cable connections on both sides and a black label displaying technical specifications.

Output /
Adjustable
Power

Delivery time: 1-2 days

MW Mean Well PWM-90-24 LED transformer Constant voltage 90 W 0 - 3.75 A 24 V DC dimmable, PFC circuit, Surge protection 1 pc(s)

(3)

MW Mean Well PWM-90-24 LED transformer Constant voltage 90 W 0 - 3.75 A 24 V DC dimmable, PFC circuit, Surge protection 1 pc(s)

Output /
Adjustable
Power

Delivery time: 1-2 days

MEAN WELL HDR-60-15 Rail mounted PSU (DIN) 15 V DC 4 A 60 W No. of outputs:1 x Content 1 pc(s)

(5)

A DIN rail mounting power supply by Mean Well, model HDR-60-48, with input range 100-240VAC and 48V output.

Directly on the DIN-rail mountable · Closed design, touch-proof screw terminals · Universal input · Overload protection through current limitation, auto recovery · Protected against short circuit, overload, over voltage · Low idle power · LED display for power-on · Insulation category II

Delivery time: 1-2 days

MW Mean Well RS-25-5 SMPSU 5 V DC 5 A 25 W

(11)

Metallic switched-mode power supply with ventilated casing, showing connection terminals on one side. Primarily for industrial applications.

Output 5 V DC / 5 A
Power 25 W
Screw terminal

Delivery time: 1-2 days

MEAN WELL DDR-15L-24 Rail mounted DC/DC converter (DIN) 24 V DC 0.63 A 15 W No. of outputs:1 x Content 1 pc(s)

(2)

A black DIN rail power supply module, mounted on a metal rail, displays connections and technical specifications on the front panel.

For DIN rail mounting. · Can be used on DIN-rail TS-35/7.5 or 15 can be installed · Very narrow: width only 17.5 mm · Wide input voltage range 4:1 · No minimum load required · Regulated output voltage (±10%) · Cooling by free air convection · Input/output insulation 4000 V · Protection: short circuit, overload, over voltage, input polarity, input under voltage protection

Delivery time: 1-2 days

MEAN WELL CSP-3000-400 SMPSU 400 V DC 7.5 A 3000 W

Housing of a power supply unit with ventilation slots and electrical connections, model designation 'CSP-3000-250', suitable for various voltages.

· Closed design (case) with fan · Input voltage 180-264 VAC · Overload protection through current limitation, switch-off after 3 s · Protected against short circuit, overload, over voltage, over temperature, fan failure · Built-in PFC circuit · Low idle power · Parallel function · Active power distribution of up to 7200 W (2+1 power supplies) · Switching on and off of the output voltage via remote signal · Internal auxiliary voltage 12 V/0.4A

Delivery time: 1-2 days

MEAN WELL APV-16-12 LED transformer Constant voltage 15 W 0 - 1.25 A 12 V DC not dimmable, Surge protection 1 pc(s)

(6)

A rectangular, white power supply with labels. Two wires for power transmission protrude. Symbols for voltage and safety.

Constant voltage
12 V DC
0 - 1.25 A

Delivery time: 1-2 days

MEAN WELL HDR-100-24 Rail mounted PSU (DIN) 24 V DC 3.83 A 92 W No. of outputs:1 x Content 1 pc(s)

(5)

Signature of a switched-mode power supply for DIN rail mounting. Technical details and power load information printed.

Directly on the DIN-rail mountable · Closed design, touch-proof screw terminals · Universal input · Overload protection through current limitation, auto recovery · Protected against short circuit, overload, over voltage · Low idle power · LED display for power-on · Insulation category II

Delivery time: 1-2 days

MEAN WELL HDR-100-24N Rail mounted PSU (DIN) 24 V DC 4.2 A 100.8 W No. of outputs:1 x Content 1 pc(s)

A black Mean Well switched power supply model HDR-100-48 on a DIN rail. Input: 100–240V, Output: 48V, 2.1A.

Directly on the DIN-rail mountable · Closed design, touch-proof screw terminals · Universal input · Protected against short circuit, overload, over voltage · Low idle power · LED display for power-on · Insulation category II

Delivery time: 1-2 days