CHAUVIN ARNOUX

Chauvin Arnoux L642 Temperature data logger Unit of measurement Temperature -200 up to 1375 °C

Chauvin Arnoux L642 Temperature data logger Unit of measurement Temperature -200 up to 1375 °C

Small, handy
Up to 240 000 measurements can be stored in the non-volatile memory
Battery life 100 hours to 45 days (depending on the recording interval and duration)

Currently not available

Chauvin Arnoux Test lead [ - ] 50.00 m 1 pc(s)

Chauvin Arnoux Test lead [ - ] 50.00 m 1 pc(s)

High-quality measuring accessories for measuring earthing resistance and specific earth resistance

Currently not available

Chauvin Arnoux L562 Voltage data logger Unit of measurement Voltage 0, 0 up to 600, 600 V AC, V DC

Chauvin Arnoux L562 Voltage data logger Unit of measurement Voltage 0, 0 up to 600, 600 V AC, V DC

Small, handy
Up to 240 000 measurements can be stored in the non-volatile memory
Battery life 100 hours to 45 days (depending on the recording interval and duration)

Currently not available

Chauvin Arnoux P01101996 ca6160zbh Software CE link for CA 6160 1 pc(s)

Software CE Link for CA 6160

Currently not available

Chauvin Arnoux P01102202 N/A 1 pc(s)

Adapter with five plug connections, colour-coded and labelled as 'L1', 'L2', 'L3', 'N' and earth symbol.

Adapter for testing at 16 A CEE-socketsEquipped with 4 mm safety sockets (PE, N, L1, L2, L3)CAT IV 600VFor testing the insulation resistance and the phase sequence of the external conductor on CEE sockets

Delivery time: 6-8 days

available from 01/09/2026

Chauvin Arnoux CA 6416 Earth ground clamp meter

A digital clamp meter displaying '0.237 mA' on its screen, used for measuring electrical current without circuit interruption.

Delivery time: 3-4 days

Chauvin Arnoux Terminal CAT II Red, Black

Two test probes: One red and one black, lying side by side. They are connected by a thin cable, which is visible on the right.

Red, Black

Delivery time: 3-4 days

Chauvin Arnoux C113 Clamp meter adapter A/AC reading range: 0.1 - 1200 A

A red clamp ammeter, model 'C 100', for measuring electric current. Displays scales for current strengths up to 1000 A.

Output signal: Alternating current
Conversion ratio: 1000/1
Output: Via cable and plug (Ø4 mm, insulated)

Delivery time: 3-4 days

Chauvin Arnoux MH60 Clamp meter adapter A/AC reading range: 0.01 - 140 A A/DC reading range: 0.01 - 140 A

A black and red electrical clamp meter with cable. It is used to measure electrical current without direct contact.

Compact clip-on current transformer for measuring very low to medium direct and alternating currents
Encapsulation-Ø: 26 mm
Input: Measurement range 0.01 A...140 A peak

Delivery time: 3-4 days

available from 14/10/2026

Chauvin Arnoux BR04 Decade box Resistance 1 %

Resistance box with four rotary knobs for adjusting different resistance values. Labels indicate current ranges.

Decade of resistance for use in training, in laboratories, in research and development and in maintenance
Desk case with 4 decades with 11-digit selector switch and Ø 4 mm safety jack output
Decade 1: 1 Ω to 10 Ω - I max. 700 mA

Delivery time: 3-4 days

Chauvin Arnoux PEL 102 + 3x MA193-250 Mains-analysis device, Mains analyser, P01157150 Calibrated to Manufacturer's standards

Chauvin Arnoux PEL 102 + 3x MA193-250 Mains-analysis device, Mains analyser, P01157150 Calibrated to Manufacturer's standards

For single-phase, two-phase and three-phase networks (with and without neutral conductor) and other electrical installations
Connection without interrupting the power supply
Data transfer: Bluetooth, Ethernet and USB

Currently not available

Chauvin Arnoux P01651021 P01651021 Tester holder 1 pc(s)

Chauvin Arnoux P01651021 P01651021 Tester holder 1 pc(s)

Modern table holder for measuring device C.A 1510

Currently not available