CHAUVIN ARNOUX

Chauvin Arnoux P01157180 L411 Amperage data logger Unit of measurement Amperage 0.5 up to 3000 A/AC

A handheld digital data logger with a connected flexible red probe, displaying readings on a blue screen, used for capturing electrical measurements.

High performance 1-channel current data logger with permanently attached MiniFlex current transformers
Quick and easy to set up – ready to use in a few minutes
Suitable for long-term recordings for fault finding, analysis and monitoring of currents from 0.5 to 3000 A AC

Delivery time: 3-4 days

available from 23/09/2026

Chauvin Arnoux C148 Clamp meter adapter A/AC reading range: 1 - 1200 A

A red current clamp multimeter with black handles, suitable for measurements up to 1000 A, displays various measurement scale indications.

Output signal: Alternating current
Converter ratio: 250/5, 500/5 & 1000/5
Output: Sockets (Ø4 mm, insulated)

Delivery time: 3-4 days

available from 23/09/2026

Chauvin Arnoux P01103057 1 pc(s)

Currently not available

Chauvin Arnoux C.A 742 IP2X Two-pole voltage tester CAT IV 600 V Acoustic, Bargraph, LED

Chauvin Arnoux C.A 742 IP2X Two-pole voltage tester CAT IV 600 V Acoustic, Bargraph, LED

Voltage test up to 690 V/AC
Single-pole phase conductor detection
Automatic AC/DC detection

Currently not available

Chauvin Arnoux P01103079 1 pc(s)

Chauvin Arnoux P01103079 1 pc(s)

Accessories or spare part for Qualistar C.A 8345Solid magnetic holder with hook and strong holding forceSuspension of the Qualistar C.A 8345 on magnetic surfaces for long-term recordings and for hands-free operation

Currently not available

Chauvin Arnoux P01654561 Hose 1 pc(s)

Perform pressure measurement with C.A 1550 micromanometerPerform air speed and volume flow measurements with Pitot tube and C.A 1550 micromanometer

Currently not available

Chauvin Arnoux MN10 Clamp meter adapter A/AC reading range: 0.5 - 240 A

Chauvin Arnoux MN10 Clamp meter adapter A/AC reading range: 0.5 - 240 A

Rated current 200 A AC
Output signal: Alternating current
Conversion ratio: 1000/1

Currently not available

Chauvin Arnoux P01298071 P01298071 Test equipment case (L x W) 195 mm x 270 mm

Chauvin Arnoux P01298071 P01298071 Test equipment case (L x W) 195 mm x 270 mm

Carrying case
Suitable for C.A 1510 black

Currently not available

Chauvin Arnoux Differential probe 50MHz Compatible with (details) Scope-Meter MTX 1052

Chauvin Arnoux Differential probe 50MHz Compatible with (details) Scope-Meter MTX 1052

An indispensable complement to digital or analogue oscilloscope to display signal level is not connected to the earth. Sui...

Delivery time: 6-8 days

available from 21/09/2026

Chauvin Arnoux C122 Clamp meter adapter A/AC reading range: 1 - 1200 A

Chauvin Arnoux C122 Clamp meter adapter A/AC reading range: 1 - 1200 A

Output signal: Alternating current
Conversion ratio: 1000/5
Output: Sockets (Ø4 mm, insulated)

Currently not available

Chauvin Arnoux P01295513 1 pc(s)

Chauvin Arnoux P01295513 1 pc(s)

Accessories for Chauvin Arnoux insulation meter 5 kV (C.A 6505 / C.A 6545 / C.A 6547 / C.A 6549)Length: 3 mColour, blackWith alligator clip

Currently not available

Chauvin Arnoux P01191309 CA 6652 Adapter 1 pc(s)

Chauvin Arnoux P01191309 CA 6652 Adapter 1 pc(s)

Test adapter for AC charging stations with type-2 plug for electric vehicles
Immediate diagnosis of AC charging infrastructures for electric vehicles (BEV/PHEV)
Complies with IEC 61851-1 & IEC 60364-7-722 standards

Delivery time: 3-4 days

available from 23/09/2026