Overview
Range width 1000 m
2 adjustable frequencies
supply status and RSSI Sender can be transmitted
Range width 1000 m
2 adjustable frequencies
supply status and RSSI Sender can be transmitted
This module evaluates received data of sender CX-12 T od the manual sender SHT-12 C4. The information are given as 4 bit word for further application. As long the valid data is received, the corresponding outputs are active and are switched off instantly on receiving the out signal. An analog signal displays the received value by sender. Each received data packet is activated by sender with extra information e.g. RSSI and supply status. Selectable frequencies (433.62 and 434.22 MHz) together with a special transmission protocol lead to an extremely trouble-free control Coverage possible up to 1000 m depending on places.
Transmission of 4 digital states and 1 analogue value
2-, 4-, 5- and 5-pin rows, grid 2.54mm
Inputs: 1x analogue: E.g. for reduced supply voltage 1x digital: Setting the frequency 1x digital: Setting the power saving mode 1x digital: Selection of learning and deletion modes
Outputs: 4x digital: D1 to D4 CMOS 3.3V high active 2x digital: E.g. for controlling LED´s 1x digital: Control of a Piezo disk 1x analogueue: Filtered PWM signal of the received analogue value
2 adjustable frequencies
Safe and low-interference signal transmission
Radio system with feedback
Control functions: 4 digital inputs + 1 analogueue input
Current consumption: Standby 18.2 mA (clocked 1.4 mA) at 3.3V
Temperature range: -20°C to +65°C.
No antenna included.
Suitable transmitters and modules - see optional accessories.
The free-field range is only achieved under optimum conditions.
Caution: SH-7 Series products are not compatible with SH-12 Series products.
04016138560473, SVS Nachrichtentechnik, 01250.00, CX-12 R, CX-12 R / 01250.00