Axing SZU 60-00 Antenna socket programmer

Overview

For programming the antenna boxes SSD 6-xx

Description

Simple programming of the cans via PC/laptop with the free programming software "AnDoKon" see download at www.axing.com.

The programmer SZU 60-00 and the antenna sockets SSD 6-xx are only about the UB-ID, not about the UB frequencies. Behind each UB 1-6 (Axing Multiswitch) a UB frequency is stored, which can and must be changed at the receiver. The UB frequency can only be changed at the receiver!
The User-Band-ID is only responsible for the activation in the multiswitch. The program selected by the receiver is then transmitted on the corresponding UB. If the can and receiver are tuned to the same UB, the programme is received on the TV set. If UB in the receiver and in the can do not match, there is no reception.

If the antenna socket is programmed with the UB1, then only the UB1 is let through at the socket. The remaining UBs are blocked.
In order to ensure a safe and conflict-free installation for apartment and floor-wide trunk lines, however, it is urgently necessary that the antenna boxes are programmed.

Delivery content

• 1 x F-Quickfix cable black 1.5 m
• 1 x USB to mini USB, 2 m black.

Keywords

7611682002331, Axing, SZU 60-00, SZU 60-00