Mobeye PowerGuard CM4100 LTE-M power failure alarm Frequency 800 MHz, 2600 MHz

Overview

4G LTE-M/2G COMMUNICATIONS MODULE
1 x 12 - 24 V DC input
2 x NO/NC inputs
Alarm via SMS/call/email

Description

The Mobeye PowerGuard CM4100 is a compact and understandable alarm signal for monitoring the presence of external voltage. In the event of a power failure, the contact persons are informed via push messages or call/SMS/email. By simply plugging the adapter into the socket, the voltage is monitored. Alternatively, a 12-24V DC voltage source is connected. The PowerGuard is equipped with batteries, which take over the functions in case of power failure. In the event of a power failure, the detector operates in "low-power mode" in order to protect the batteries. Alarm messages and test messages are also sent. The device has two additional inputs (NO/NC). By connecting devices or external sensors, they are also monitored. Various settings, such as alarm delays in the event of a power failure, user-defined alarm texts etc. are easy to program.
With the PowerGuard, the monitoring of the power supply and critical devices (refrigerators, refrigerators, ATMs, servers, etc.) and infrastructures (switching and control systems, etc.) is secured.

For communication, the Mobeye (M2M) SIM card is included in the delivery of the product. This low-cost "multi-provider" SIM card ensures communication over the 4G LTE-M network (with 2G as fallback). This SIM card also offers the use of the Mobeye Internet Portal and app for more comfort and optimum security. The 4G LTE-M network is very reliable, has strong penetration and also offers low power consumption. The SIM card for the Mobeye CM4100 to be activated online costs 4.00 EUR per month. This is a fixed amount based on fair use.

Optionally, a separate (micro) SIM card can be used. The device then works (only) with 2G and without using the Mobeye portal. The alarm notifications are sent via SMS and telephone call (max.) 5 contacts sent. Programming is done via (simple) SMS commands.

Characteristics

2 x NO/NC inputs - each potential-free sensor or contact can be used
Power supply and 2 x CR123 included. The batteries assume the functions in the event of a power failure
IP44 housing
Simple programming of the settings: Programming is done via the Mobeye Internet Portal or without portal via SMS commands
Additional security and user-friendliness via the Mobeye Internet Portal and the app
Alarm notifications via push message, call, SMS, e-mail and/or control room
Alarm message as a group message or as a sequential message with escalation plan and confirmation
Alarm in case of external power failure and power recovery
Alarm with an activated input (possibly in case of alarm recovery)
Warning of weak internal battery
Warning for missing test reports "Keep-Alive" (without portal: Test reports via SMS)
Developed and manufactured in the Netherlands.

Information

The ambient temperature must not be exceeded or undercut during operation (not below -10 °C and not higher than 50 °C). The device must be protected against moisture, water spray and overheating. The device may only be operated with the batteries specified by the manufacturer. The device must be protected against strong vibrations and shocks. The device must not be installed and operated in the vicinity of flammable gases, vapors or dust.
The device may only be repaired by a Mobeye® expert.

Delivery content

• Mobeye CM4100
• Power supply unit
• 2 x CR123 batteries
• Mobeye SIM card (optional).

Keywords

08719324241533, Mobeye, CM4100, PowerGuard CM4100, wireless control, wireless socket