Highest load values in cracked concrete. This reduces the need for fixing pointsideal for series assemblyFlexible to use for all lengths and diameters of Highbond anchor rods. This reduces complexityETA approval for cracked concretePress out with commercially available sealant gun
the fischer FIS HB 150 C Highbond special mortar is a system component of the fischer Highbond FHB II system for mounting in uncracked and cracked concrete. The cartridge contains a non-pyrolytic vinyl ester mortar that can be pressed out with a commercially available sealant gun. The special mortar can be used with fischer Highbond anchor rods FHB II-A S (standard), Highbond anchor rods FHB II-A L (long) made of galvanized steel, stainless steel and highly corrosion-resistant steel. When tightening the hexagon nut, the cones of the anchor rod are pulled into the mortar shell, which is clamped against the drill hole wall. the fischer Highbond FHB II system is used to secure railings, machines and steel structures in indoor and outdoor areas.
The Highbond system FHB II achieves the highest load values in cracked concrete. This reduces the need for mounting points and smaller anchor plates. The special Highbond mortar FIS HB can be processed with the anchor rod FHB II-A S (short version) or L (long version). This means that the most economical solution can be used as required. The large container form of the FIS HB Highbond special mortar is ideally suited for series assembly. The Highbond FIS HB special mortar is suitable for pre-plugging and through-hole mounting. Resin and hardener are stored in two separate chambers and are only mixed and activated in the static mixer when the injection cartridge is pressed out. FIS HB can be used with the anchor rods FHB II-A S and FHB II-A L and glue the anchor rod fully into the drill hole. When tightening the hexagon nut, the cones of the anchor rods are pulled into the mortar shell, which is clamped against the drill hole wall. The non-pyrolyst vinyl mortar seals the drill hole completely.Approved forConcrete C20/25 to C50/60, cracked and unbittenConcrete C12/15
Fischer, 519665, FIS HB 150 C
