| from 3 piece: | CHF 2.82 | 1,1% savings |
| from 5 piece: | CHF 2.79 | 2,1% savings |
| from 25 piece: | CHF 2.70 | 5,3% savings |
For covering a flush-mounted belt winder with 160 mm hole distanceNeutral, timeless design with rounded cornersQuick and clean installation without removing the belt winderMaxi roller shutter system, suitable roller belt width of 23 mmIncl. Screws and hole cover
With the stable belt winder cover plate Softline, a flush-mounted belt winder is covered quickly and cleanly without having to remove it. Due to the neutral and timeless design in white, the Softline cover plate fits inconspicuously into almost any living environment. It is suitable for belt winders with a hole spacing of 160 mm as well as for roller shutter belts with a width of 23 mm, according to the roll shutter system Maxi.For installation, the split cover plate is routed behind the belt strap so that the belt passes through the opening of the cover. It is not necessary to remove the belt winder for this purpose. Then both parts of the cover plate are plugged together and screwed to the belt winder. Matching screws for fixing and hole covers for the cover plate are included in the delivery.
Schellenberg, 53802, Softline
