6-conductor connection for two DMS full bridge sensors
2 x current-voltage output
Functions for scaling and linking the sensor signals (e.g. A+B, A-B, …)
Adjustable bridge voltage per sensor from 3 VDC to 10 VDC
Sensitivity of sensor inputs 1 … 10 mV
Transmitting the sensor data via RS-485
Programming via USB and the user interface OS (Freeware)
4 x control inputs HTL/PNP
4 x control outputs for signaling different operating states
Two DMS full bridge sensors can be connected to this measuring amplifier whose converted measured values are available at two analog outputs (current/voltage) and at four HTL control outputs.
It is a USB programming interface and an RS-485 communication interface with LECOM or MODBUS protocol available. With the aid of four HTL control inputs, a reset of the DMS sensors can be triggered.
The four HTL CONTROL outputs transmit the exceeding, undercutting of switching points as well as movements outside of a range. A DMS error can also be output.
By means of the HTL control inputs the self-attitude at the outputs can be retracted.
It is also possible to set the analog output via the HTL control inputs.
Robust plastic casing for direct snapping onto DIN rails
Motrona, 6877.5022
