| from 3 piece: | CHF 85.09 | 1,0% savings |
| from 5 piece: | CHF 84.23 | 2,0% savings |
| from 10 piece: | CHF 83.37 | 3,0% savings |
For upgrading a conventional floor heating control
Individual control of 230 V actuators for floor heating
Measurement and display of the reference and the actual temperature as well as the air humidity
Temperature processes with up to 13 changes per day
3 or 6 adjustable heating profiles (3 x heating/3 x cooling)
The Homematic IP wall thermostat with switching output in anthracite is part of the Homematic IP smart home system and controls 230 V floor heating actuators via a relay output. The wall thermostat with a switching output thus enables a simple upgrading of a conventional floor heating control for an intelligent regulation of the room temperature by replacing the till-current bimetal controller. This increases the comfort of your home and actively helps save energy.
The smart solution offers individual temperature trends with up to 13 changes per day in 3 or 6 adjustable heating profiles (3x heating/3x cooling). The desired temperature can be selected comfortably in 0.5 °C steps via adjustment wheel via Homematic IP wall thermostat with switching output. The large illuminated display shows the reference and the actual temperature as well as the humidity. Moreover, all values can also be read and set via Homematic IP APP.
The wall thermostat is mounted in a classic flush-mounted socket and WAS makes it much easier to replace existing wall thermostats. The dimensions of the Homematic IP wall thermostat even allow integration into multiple frames from leading manufacturers. If the thermostat is to be used without the Homematic IP access Point or without the central CCU2/CCU3, the desired settings can be selected directly at the thermostat without the Smart Home connection.
Enables easy upgrading of a conventional floor heating control for intelligently controlling the room climate via smartphone by replacing the existing wall thermostat
Individual control of 230 V actuators for floor heating via relay output according to defined heating profiles
Measurement and display of target and actual temperature as well as humidity on a large illuminated display
Individual temperature processes with up to 13 changes per day in 3 or 6 adjustable heating profiles (3 x heating/3 x cooling).
Operation requires one of the following solutions: + Stand-alone (without access Point or control unit in combination with a floor heating actuator)
Direct configuration on the wall thermostat) + Homematic IP access Point with free smartphone app and free cloud service + Central CCU3 with a local user interface WebUI + Third-party partner solutions.
Homematic IP, 159928A0, HmIP-BWTH-A
