Ansmann BC 6-12V / 6 A 1001-0145 Charger, Industrial charger, Battery monitor, Car battery tester 6 V, 12 V 2 A 6 A
-
Product description
Overview
Intelligent and secure charging control
Reverse polarity protection, overload protection
Real long cableDescription
10-level charger for 6V and 12V lead-acid, lead-gel lead-fleece batteries, and 12V LiFePo4 batteries
Reliable contact over pole terminals or ring terminals is possible
Clear LCD display - easy to use
6 different charging programs can be set
RECORD Mode, if the battery is totally discharged or switched on
Selectable COLD TEMP mode (12V AGM/C) in cold temperatures
Electronic protection against short circuit, reverse polarity and overload
Battery fault detection
Automatic recharging, if the battery remains connected to the device
Ideal for hibernation of lead-acid battery completely excluded
Dust and splash-water protected thanks to IP65Characteristics
Thanks to numerous features, our powerful 10-stage charger BC 6-12V / 6 A ensures a safe and gentle charging of lead-acid batteries with a capacity of 4 200 Ah. It guarantees optimum performance and long life of the batteries. Via the "MODE" button 6 intelligent charging programs or a power supply mode can be selected, with which 12-V applications can be operated via the provided car socket, such as a cooling box.
The charger is dust proof and splash-proof (IP65) and has the following electrical safety features: Reverse polarity protection, overload protection and short-circuit protection
In addition, our intelligent charger is suitable for standby/parallel operation and can remain connected to the battery uninterrupted. It keeps these full even if the battery is loaded/discharged at the same time.
Selectable charging programs:
6V STD or 12V STD: For lead acid and lead gel batteries
12V AGM/C: For AGM batteries & in cold weather (-20°C +5°C )
12V M: Trickle charge for hibernation of lead-acid batteries Total discharge excluded
12V LFP: For lithium iron batteries (LiFePo4, LFP, LiFe)
RECORD: For deep-discharged batteries
The charging currents are controlled automatically via the selected charging mode:
2 A in "6V STD" and "12V M" modes
1.5 A in "RECORD" mode
6 A IN THE MODE "12V STD", "AGM/C", "LFP"
Fully automatic, intelligent 10-level charging
1. Battery Check: After selecting charge mode, the charger checks the battery status.
2. Desulfation: Automatic detection of sulfated lead-acid batteries. By pulsing the current and voltage, the sulphate is detached from the lead plates of the battery in order to be able to restore the maximum capacity of the battery.
3. Refresh: Older or infrequently used batteries are charged with a gentle pre-charging current and thus reactivated.
4. Reactivation charging: Gentle charging of the battery with increased charging current.
5. Analysis: Switch-off of the charging currentDelivery content
- With 6 bits. Pole terminals
- Ring Terminals
Keywords
Ansmann, 1001-0145, BC 6-12V / 6 A, battery charger, battery chargers, car battery charger
-
Product specifications
-
Downloads
-
Reviews