GYS GYSMI E163 Multi-process welder

Overview

Hot Start
Arc Force
Anti-Sticking

Description

Microprocessor-controlled electrode and TIG welding inverters with a 230 V mains connection - 50/60 Hz single-phase. Constant welding power of 10 - 160 A.
The pulsed MMA welding mode is particularly suitable for climbing seams (PF). The pulse mode reduces the energy input or the heat development of the welding bath and stabilizes the weld seam.
PROTEC400-Tec
Hnology for protection against over/under voltage as well as mains voltage fluctuations (+/- 15 %).
Suitable for all common rod electrodes (steel, stainless steel, cast iron, etc.) to be welded onto direct current from 1.6 to 4.0 mm.

Characteristics

HOT START: Improves ignition properties by temporarily increasing the welding current. The arc fires reliably immediately· ARC FORCE: Stabilizes the arc by correcting the voltage when the electrode gap to the weld changes · ANTI-STICKING: Helps to reduce the tendency of the electrode to stick in the welding bath

Delivery content

• Incl. Ground terminal with cable (1.6m, Ø16mm²)
• Electrode holder with cable (2m, Ø16mm²)
• Hard case

Keywords

03154020036635, GYS, 036635, GYSMI E163, welding equipment