Overview
All functions of the Next18 interface including SUSI are assigned
SMD-equipped circuit board
TAMS Elektronik 42-01194-01-C FD-Next18 Decoder w/o cable
CHF 12.40
VAT included
plus
Delivery time:
3-4 days
in stock
Free return shipment until 31.01.2026
CHF 12.40
VAT included
plus
Product description
Description
Digital mode in Motorola II-format:
Maximum 255 addresses
14 or 27B driving speeds
Functions F0 to F8 (F5 to F8 via second address)
Programming: Register
Digital mode in DCC format:
127 base addresses or 10,239 extended addresses
14, 28 or 128 speed settings
Functions F0 to F28
Programming: Configuration variables (direct programming on the programming track, DCC-compliant) or POM (Programming on Main = main track programming)
Analogue mode:
Analogue systems with DC travel transformer
Automatic analog detection
Can be switched off
Automatic processes
Speed-dependent switch-on and off. Application examples: Switching on and off of the high beam or the lighting of the driver's cab.
Automatic registration via DCC-A
Function outputs
Assignment of the functions to the outputs with function mapping according to RCN-227. Each function (F0 to F28, each separately for forward and reverse drive) can be assigned one or more outputs. In addition, there is the option of assigning the functions to a function other than "OFF" switch.
Assignment of the outputs to the functions: Freely selectable
Effects of the function outputs:
Direction-dependent switching
Patch light: When switching to marshaling mode, the marshaling locomotive signals are switched on and the signals for normal operation are switched off at the same time.
Inverted switching: When set to "on", the assigned output is switched off, when set to "off".
Flashing: By assigning the flashing function to 2 outputs and the function "inverted switching" to one of the two outputs, an alternating flashing is generated. The flashing frequency is set separately for each output.
Dimming: To reduce the voltage at the output. Application example: The lamps of older vehicles intended for analog operation can be dimmed and then do not need to be replaced after the decoder is installed.
Gradually dimming up and down: To gradually increase or decrease the voltage at the output: Application example: Simulation of old oil or light bulbs.
Fire simulation
On/off at a defined voltage (speed)
Triggering the functions:
Press the function keys / switch on/off the functions
Feedback with RailCom
RailCom-Sender according to RCN-217: Send the decoder address
Transmission of dynamic RailCom information: Reception statistics
Reading out the CVS
Keywords
TAMS Elektronik, 42-01194-01-C, FD-Next18
Product specifications
Downloads
Reviews
{{#if results}}
{{/if}}
{{results.[0].headline}}