Overview
Very low processing shrinkage 0.3%
Very good mechanical properties
High chemical resistance to lubricants and oils
Wide range of applications
Very good layer adhesion
Spectrum Filaments 80174 PA6 Low Warp Filament PA6 chemical-resistant, shatter-proof 1.75 mm 1000 g Ecru 1 pc(s)
41,24 €
(1 kg = 41,24 €)
VAT included
plus
in stock
Delivery time:
1-2 days
41,24 €
(1 kg = 41,24 €)
VAT included
plus
One article is not enough for you and you want to save money?
| from 3 piece: | 40,82 € | 40,82 € / 1 kg | 1,0% savings |
| from 5 piece: | 40,41 € | 40,41 € / 1 kg | 2,0% savings |
| from 10 piece: | 40,00 € | 40,00 € / 1 kg | 3,0% savings |
-
Product description
Description
Strong and resistant to abrasion
Spectrum PA6 Low Warp is an extremely durable material based on polyamide 6, enriched with admixtures, which reduce a high shrinkage during the processing of materials of this kind. The most important features of the Spectrum PA6 Low Warp Filaments are: Its chemical resistance to fuels and oils, its high impact resistance, and very good mechanical properties.
The improved cohesion of the Spectrum PA6 Low Warp material allows for a significant reduction in the effect of the "curling", i.e. separation of the contact surface between the lower base of the manufactured part and the work table. A significant reduction in this negative effect is due to the low processing shrinkage of 0.3%.
Additives that improve the properties of the material make it a self-lubricating material, so that the manufactured parts can also be used in places where friction occurs. In addition, the components produced will have good electrical insulation properties and physiological neutrality.
The technically very attractive properties of Filament Spectrum PA6 Low Warp can be achieved if the basic rules for storage of this type of material are observed (in a dry and dark place with humidity below 15%). To achieve the best possible parameters of the printed object, it is recommended to dry the material before starting work.Information
The technically very attractive properties of Filament Spectrum PA6 Low Warp can be achieved if the basic rules for storage of this type of material are observed (in a dry and dark place with humidity below 15%). To achieve the best possible parameters of the printed object, it is recommended to dry the material before starting work.
Keywords
Spectrum Filaments, 80174, PA6 Low Warp
-
Product specifications
-
Downloads
-
Reviews