Multi-channel device, can easily switch at the national borders
Power supply 12 or 24 Volt direct voltage (can also be used in older trucks without converters)
Large LC-display with 7 possible color settings, can be dimmed
Automatic or manually adjustable noise limiter
Key-lock (lock)
Integrated ANL noise suppression
Channel 9/19 switch
Vox function for voice control transmission internal and external
Channel search (scan)
Up-/down keys for channel selection
MAAS KCB-3000 CB-radio set multi-standard with vocal microphone and headset connection. Built-in front speaker with very good loud reproduction. Due to its very low installation depth, the device fits into any DIN slot and is suitable for surface or under mounting. The new MAAS KCB-3000 comes with voice-controlled Vox microphone, which can be set in several stages in response sensitivity and response delay. In addition, one can also have microphone fittings with 2 pin. Connect the Kenwood circuit to the front of the device (not included). A fully equipped CB radio for cars or trucks, suitable for 12 volt and 24 volt power supply. The device has a large illuminated LCD-display, on which all the important information is displayed clearly. The color of the background lighting can be changed in 7 stages or switched off completely.
Control for noise limiter and volume
Microphone with built-in channel selection keys and Vox function
Connections for antenna, external speakers and microphone fittings (Kenwood standard) available
Connection for microphone fittings and loud speakers (Kenwood standard: 2.5 mm jack socket for speakers - 3.5 mm microphone / PTT)
Power cable can be removed
The KCB-3000 has, as opposed to similar equipment on the market, a 6-pin GDCH connection for microphones, as well as a 2 pin. Socket for speakers and microphone sets with "Kenwood" configuration, which is also really compatible (especially adequate LF signal).
MAAS Elektronik, 3035, KCB-3000, cb radio, citizens band radio
