Overview
Displays in Celsius or Fahrenheit
Detects temperatures from 0°-99°C or 32°-210°F
LCS certified
Temperature warning alarm when set value is exceeded
Nickel-plated copper base
Thermaltake Pacific Temperature Sensor Water cooling - temperature sensor
Product description
Description
The Thermaltake Pacific temperature sensor detects coolant temperatures between 0 ° C and 99 ° C and displays the value in Celsius or Fahrenheit. With temperature alarm, compatibility with all G1/4 ports and easy installation, the gadget ensures that the liquid cooling system operates within the optimum operating temperature ranges and releases the performance of your PC.
LCS Certified
Tt LCS Certified is an exclusive Thermaltake certification that only applies to products that meet the standards for design and hardcore enthusiasts. The Tt LCS certification was created to allow Thermaltake to tell all power users which chassis have been tested to be compatible with extreme liquid cooling configurations. This ensures that you get the best performance from the best features and functions.
Celsius / Fahrenheit Temperature Display
The Pacific Temperature Sensor provides temperature readings at which the unit can be switched between Celsius and Fahrenheit. The Pacific Temperature Sensor is equipped with a temperature warning alarm that continuously detects and emits beeps when the coolant temperature rises above the user set value.
Nickel plated copper base
The Pacific temperature sensor has a nickel plated copper base to prevent corrosion and offers exceptional durability as well as a G1/4 "thread threaded fitting. It is designed to give superior performance to any liquid cooling system.
Simple Installation
The Pacific Temperature Sensor provides a simple and user-friendly configuration and allows the user to get the ultimate performance from their liquid-cooled PC by simply connecting the power cable to it.
1. Please check your system immediately to avoid hardware damage if the alarm is triggered. The preset alarm temperature is 45 ° C.
2. Please check the melting point or the maximum operating temperature of the individual cooling components before setting the temperature threshold manually.
Information
Caution
Thermaltake recommends the following steps to be performed after completing the water circuit configuration:
- It is strongly recommended to use a proven premix coolant.
- Fill the tank with coolant and turn the unit on and off several times as the pump pushes the coolant into the loop.
- DO NOT allow the pump to run dry, if no liquid enters the pump, turn it off immediately
- Fill the tank all the way to the top to prevent air from entering the pump
- If necessary, tilt the system slightly from side to side to remove air from the loop.
- Place some paper towels under fittings and joints to check for leaks.
- Run the loop with the filler neck open for 24 hours to completely remove air from the loop
- Flush the system thoroughly before starting to prevent coolant or unwanted particles from adhering to your hoses, radiators and other cooling components.
- Coolant may fade over time.
Keywords
00841163066508, 04717964406699, Thermaltake, CL-W151-CU00BL-A, Pacific Temperature Sensor, cooler
