Compatible with all common controllers (e.g. Arduino, ESP and Raspberry)
Power module for external power supply to the superstructures ( Wide Range 5 to 12 V )
Mounting plate and screws for fixing the breadboard and controller
Alligator clip (10x) and jumper cable (20x 25cm + 20x 50cm + 40 pin adapter)
Breadboard toolkit including power module (3.3 + 5V)
The breadboard toolkit is the ideal starting point to use the microcontroller of your choice
Test set-ups and electronic experiments.
The mounting bracket supplied has several drilled holes for the installation
To mount most common controllers such as Raspberry Pi, Arduino, BBC Micro:bit and much more securely (screws are included in the set).
In addition to a 830-PIN (200 for power supply ) breadboard and various jumper cables (including pins to configure the cables "male" as required), a power module is also included.
This module allows easy voltage supply of your own experiments or test lab on Breadboards. The board is simply plugged in and supplied, then the breadboard with 3.3 and 5 V, the voltage can be adjusted separately for each side.
In addition, 3.3 as well as 5 V and ground on pins are also available for acceptance. The maximum output current is 700 mA.
The board can be powered via most of the mobile phone chargers thanks to the micro USB port, IN addition, a standard USB and a DC IN input are also available. If the DC IN is used as an input source, the USB ports can also be used to supply current. You can use the switch to select between the input source USB or DC IN.
Joy-it, Bread-Set2, Breadboard Set, bread board, breadboard
