Description
Homematic IP wireless access Point – anthracite HmIP-HAP-A.
The Homematic IP Access Point is the central element for the cloud-based, intuitive setup and control of the Homematic IP Smart home system via the free Homematic IP APP. The Access Point is connected to the conventional router and connects the Homematic IP cloud in Germany with the Homematic IP devices in your home - and that is completely encrypted. No registration or creation of a user account is necessary during setup. If the Access Point is connected to the Internet, all functions can be accessed via free APP. The intuitive APP provides all conceivable functions clearly. The APP can also be used to program new devices in a few simple steps. And if you want, you can easily control the Homematic IP system via voice commands (Amazon Alexa and Google Assistant). Thanks to a free field range of up to 400 meters, devices in distant corners can also be integrated reliably in the system.
The innovative IP radio protocol communicates extremely energy-efficiently on the 868 MHz/869.525 MHz frequency. In this way long battery operating times of the programmed devices are reached and users are not exposed to any permanent radio radiation. The high efficiency is also evident with the power consumption of the access point. This has an average power consumption of 1.1 watts, which should avoid surprises in the electricity bill. Despite the low energy consumption, the Basis also provides the user with the necessary status updates visually at any time. For this, the button on the front of the access point lights up in different colors, depending on the operating status.
The Homematic IP access Point can be operated lying on the table, or firmly mounted at the wall. Matching screws and dowels as well as the network cable required for connection to the router are also included.
Homematic IP wireless switch/measurement cable –SWITCH outside/smart outdoor socket with measurement function Smart AND MEASURE ENERGY FLOW
Switch connected devices on and off at any time and from anywhere: The switching measurement cable from Homematic IP is suitable for outdoor use and can be controlled using the radio button, voice control or the Homematic IP APP. And by the way, both energy consumption and energy feed are measured.
THE INTELLIGENT HELPER FOR EVERYDAY LIFE
Almost all conventional electrical appliances are switched as desired - via Homematic IP buttons and remote controls, via voice command or via smartphone, whether from home or while traveling. Outdoor lighting scenarios such as Christmas decorations or garden equipment such as pond pumps and irrigation systems can be switched. It is also used in the control of charging E-bikes and other battery devices. This means that the devices can be adapted to everyday life and can be switched on and off automatically at any desired time or depending on the sunrise or sunset.
POWER CONSUMPTION UNDER CONTROL
No unnecessary energy is wasted through the measuring function, because the consumption values and costs of connected electrical appliances are over APP. This quickly identifies "energy guzzlers" in the home and switches devices on only when they are needed. Thanks to the high level of measurement accuracy, the switching measurement cable can also be flexibly integrated into individual programming so that devices can be automatically switched on or off at Hohem or low power consumption.
SIMPLY START
The installation is done very easily by plugging in a standard plug socket - done! The switch/measurement cable can be installed in every socket in the house or in the house. Thanks to its outdoor suitability, the device can be set up anywhere in the garden.
"ALEXA, TURN OFF THE POND PUMP."
The switching measurement cable can even be operated comfortably from the sofa - very easily by voice command with Amazon Alexa or Google Assistant.
EXTENSION OF RANGE
Can be used optionally for extending the range of the radio signal. For more information, see the Homematic IP User's Guide.
This text is machine translated.
