ACV Steering wheel control interface

CHF 31.15
VAT included
plus
Delivery time: 3-4 days
in stock
30 days free return shipment
ACV Steering wheel control interface
CHF 31.15
VAT included
plus
One article is not enough for you and you want to save money?
from 3 piece : CHF 30.83 1,0 % savings
from 5 piece : CHF 30.52 2,0 % savings
from 10 piece : CHF 30.21 3,0 % savings

Product description

Overview

The mini ISO interface transmits the steering wheel remote control signals to retrofit car radios and thus enables the maintenance of the steering wheel key functions during radio exchange. The pin-specific assignment of the pins 10/11/12 provides for a clear signal guidance for SWC1, ground and SWC2, WAS simplifies the wiring and reduces the installation time. The adapter is designed for vehicles with +12-volt ignition supply and uses the existing ignition voltage to initialize the steering wheel remote control communication without requiring additional power modules. The compatible cabling enables the use of Daiichi radios with direct color coding in vehicles prepared for the installation of a factory radio, thus ensuring seamless integration into prepared and non-factory systems.

Description

This car radio adapter converts the analogue steering wheel remote control outputs into a standard input for retrofitting radios and is connected via the mini ISO steering wheel interface of the vehicle. During installation, the adapter is connected to the vehicle harness and directs SWC1, GND and SWC2 through the corresponding pins. At the same time, the ignition voltage (+12 V) is monitored to ensure correct initialization. It is typically used to install a retrofit radio in vans and light commercial vehicles from Citroën, Fiat, Opel and Peugeot, which must retain the factory-fitted steering wheel remote control functions. The device supports installations without the original car radio as well as direct connections to Daiichi systems and is suitable for models with factory-made radio preparation.

Characteristics

Suitable for vehicles from Citroën, Fiat, Opel and Peugeot
Supported vehicle models: Citroën Jumper, e-Jumper, Relay; Fiat Ducato (ZAF 250); Opel Movano Cargo C and Electric Cargo C; Peugeot Boxer, e-Boxer
Model years covered: 2006–2024 (model-specific ranges)
Connection type: Mini ISO steering wheel remote control interface
Supported pin assignment: Pin 10/pin 11/pin 12 (SWC1 / GND / SWC2)
Operating input: +12 V ignition voltage required
Compatibility notes: For vehicles with radio preparation, without OEM device or with Daiichi OEM cabling via colored cables

Keywords

ACV, 42xfa016

Product specifications

Downloads

Reviews