Compact mATX format: For space-saving builds
Tempered Glass with 2x integrated 140-mm fans
Mainboard-Support: Compatible with Mini-ITX and Micro-ATX
Plenty of space for graphics cards: 5 PCIe slots and up to 400 mm GPU free space
Strong cooling: Up to ten fans and radiator support up to 360 mm
The Lian Li Vector V150 targets all those who want to build a compact system but does not want to compromise on strong hardware and high-quality optics. The front made of tempered glass combines an infinity mirror with two integrated 140-mm fans. Inside the casing offers much place for large components, several drives and a comprehensive cooling. A pre-installed RGB and fan hub also helps you organize lighting and fan control cleanly.
The Lian Li Vector V150: Compact design, made for large components
The Vector V150 supports Mini-ITX and Micro-ATX motherboards and offers enough space for high performance components. CPU coolers with a height of up to 163.5 mm are possible for air cooling. Thanks to 5 PCIe slots and up to 400 mm space for graphics cards you can also block large GPUs.
Clean cable management for a proper construction
For a tidy interior there are well-placed cable entries, several fixing points as well as Velcro belts. This allows the cables to be bundled and will remain in good shape for a long time.
You are also flexible with the drives. A drive cage can be used in the power supply chamber depending on the length of the power supply. With a 150 mm power supply unit you can use 2 x 2.5 inch SSDs or 1 x 2.5 inch SSD + 1 x 3.5 inch HDD. In addition there are brackets for three more SSDs.
Pre-installed RGB and fan hub
The housing already contains an RGB and fan controller. The lighting and the fan are brought together in one place, WAS makes construction and cable routing easier to understand.
If you connect the hub to the motherboard, you control the RGB lighting via compatible motherboard software. Alternatively, the hub can be switched to a wireless mode that can be used with a Lian Li L-Wireless controller (sold separately) and L-Connect 3.
Cooling as in a wind tunnel: Many fans, clear air flow
· 3 fans pre-installed: 2x 140 mm front (integrated) + 1x 120 mm rear
· Up to 10 fans in total: Space for up to seven more fans
· Cover: 2x 140 mm or 3x 120 mm
· PSU-upper chamber: 2x 120 mm possible
Cooling your components is one of the big advantages of the Vector V150. Three fans are already installed ex-factory: Two 140-mm fans in the front and one 120-mm fan at the rear.
The lid has room for 2 x 140 mm or 3 x 120 mm. On the top of the power pack chamber you can also mount 2 x 120 mm. If you remove the side drive bracket, additional mounting points for 2x 120 mm will be created. This enables a total of up to ten fans.
Radiator support for AiO water cooling
If you want to use an AiO, the Vector V150 housing is perfectly ready for this: There is space in the lid for a 280 mm or 360 mm radiator. This allows you to adjust the number of fans and radiators to match the hardware and the volume you want.
In addition, the casing places on an air guide, which especially cools the graphics card. In the power supply chamber there is an angled panel, which directs the fresh air of the front fans directly to the GPU. Then the air rises upwards through the remaining components - which ensures stable temperatures, especially in high-performance graphics cards.
Infinite mirror front made of tempered glass
The front made of tempered glass is fitted with a large infinity mirror and at the same time integrates the two 140-mm fans. Together with the side part made of glass you have a clear view of your hardware and the RGB-lighting.
This text is machine translated.
Compact mATX casing
Infinity mirror front with pre-installed fans
GPUs up to 400 mm
Up to 10 fans possible
For Mini-ITX & Micro-ATX
Please pay attention to the compatibility information of the manufacturer. You can find an up-to-date overview on the manufacturer's website.
Lian Li, 4718466020666, Vector V150 INF, Desktop, PC, Computer
