Gossen Metrawatt METRAFLEX 6001 XBL Clamp meter adapter A/AC reading range: 0.32 - 6000 A Flexible

Overview

Flexible current sensor 60/600/6000 AAC
Loop length 122 cm
4-pin Hypertronics-Stecker
Suitable for MAVOWATT 20, 30, 40, 70, 230, 240, 270, MAVOSYS10

Description

METRAFLEX are AC current sensors based on the Rogowski principle. They can be used for AC current measurement up to 3000A by connecting them to a suitable measuring device (data logger, mains analyser etc.).

They can be placed around one or more conductors of any design (insulated cables, pipes, busbars).
For autonomous operation of the measuring amplifier, it is supplied by internal batteries.
Product Highlights
Wide range of application, 3 measuring ranges and high bandwidth 10 Hz ... 20 kHz for harmonic analysis
Accurate measurement even at low currents, due to wide dynamic range and high sensor sensitivity
Low positional influence of the conductor and minimal external field influence
Simple application in confined spaces due to small sensor cross-section
9.9 mm and slim end cap 13.6 mm - loop length 610 mm
Safe handling even with protective gloves, Opening the sensor and setting the measuring range in one-hand operation
Extremely long battery life up to 2000 h
Connection cable included
Current sensor with protection class IP65, measuring amplifier with IP40
High user safety, measuring category 1000V CAT III, 600V CAT IV and unlimited overload capability
Your advantages
The flexible measuring head enables current measurement even in hard-to-reach places. The sensors can be placed around one or more conductors of any design (insulated cables, busbars, pipes). For autonomous operation of the measuring amplifier, it is supplied by internal batteries.
In the MAVOWATT 230 / 240 and MAVOWATT 270 / 270-400 instruments, the sensors are supplied directly from the mains analyzer. With other power analyzers, the sensors can be operated via an external power supply in the case of long-term measurements.
Technical features
Wide range of application, 3 measuring ranges and high bandwidth 10 Hz ... 10 kHz for harmonic analysis
Accurate measurement even at low currents, due to wide dynamic range and high sensor sensitivity
Low positional influence of the conductor and minimal external field influence
Simple application in confined spaces due to small sensor cross-section 9,9 mm and slim end cap 13.6 mm
Safe handling even with protective gloves, sensor opening and measuring range adjustment in one-hand operation
Extremely long battery life up to 2000 h
External power supply for long-term measurement via optional plug-in power supply s. Accessories
Current sensor with protection class IP65, amplifier with IP40
High user safety, measurement category 1000 V@CATIII, 600 V@CATIV and unlimited overload capability
Feature Specification
Output signal (AC) 50 mV/A 5 mV/A 0.5 mV/A
Rest current / noise 8 mV eff. 2 mV eff. 2 mV eff.
Measuring uncertainty (45 ... 65 Hz) ±1% ±0.1 A ±1% ±0.1 A ±1% ±1 A
Overload capability unlimited
Linearity ±0.2% of measured value
Bandwidth 10 Hz to 10 kHz (-1 dB)
Phase angle error less than ±1° (45 ... 65 Hz)

Characteristics

External power supply possible.

Delivery content

• Batteries - Instruction manual.

Keywords

04012932127621, Gossen Metrawatt, Z461C, METRAFLEX 6001 XBL, rogowski coil, current loop