| from 3 piece: | 41,57 € | 1,0% savings |
| from 5 piece: | 41,15 € | 2,0% savings |
| from 10 piece: | 40,73 € | 3,0% savings |
Standalone hard disk duplicator with One-Touch Clone button
Copies the contents of one hard disk 1:1 to another hard disk - completely without PC
Perfect for all 6.35 cm (2.5") and 8.89 cm (3.5") HDDs and SSDs with SATA
Supports hard disk capacities of up to 12 TB
Also for data backup or for testing hard disks and drives at the USB port
Incl. power supply for external power supply
Replace cloning instead of PC
Hard drives only have a certain lifetime. Once this has been achieved, this becomes noticeable through rattling and squeaking noises. In this case, cloning the HDD to a new hard disk saves the annoying re-installation of the operating system and each individual software. With this SATA Cloner Adapter you copy your data 1:1 to a second hard disk - completely without PC.
Ideal for the fast change from a traditional hard disk to fast SSDs
Copy also simply the old SATA hard disk 1:1 to a new SSD. So you can boot directly from the SSD without losing time and data. For bootable SSDs, settings must be made before, otherwise the SSD may show performance loss over time.
Also for reading out dismounted hard disks via USB - completely without installation
In order to be able to operate dismounted hard disks on a PC or notebook, the hard disks must be installed internally in the computer. This is very tedious and time-consuming. In addition to the copy function, the SATA Cloner Adapter also allows simple and uncomplicated connection of external drives to the USB 3.0 port of the PC or notebook. Simply plug it in via USB - annoying unscrewing of the PC case and the time-consuming installation is completely eliminated.
Create backups via the USB port
The converter converts any SATA hard disk (HDD/SSD) into an external USB drive. So it is very easy to save pictures, music or documents from old hard disks and create backups on your PC. Basically, this converter is also suitable for testing or operating all types of hard disks and burners on a USB 3.0 port.
USB 3.0 SuperSpeed
Thanks to USB 3.0, SATA/IDE hard disks or drives can be read with transfer rates of up to 5 GB/s and are therefore 10x faster than USB 2.0. This makes copying large amounts of data much easier. The converter cable also works with USB 2.0, but with reduced speed.
Mixed operation between SSD and HDD hard drives possible
Clone-transfer rate: Up to 400 MB/s
USB data transfer rate: Up to 5 GB/s thanks to USB 3.0
Plug & Play
Compatible with SATA I / II / III
Power supply with on/off switch
Backward compatible with USB 2.0 and USB 1.1
04053199551040, Renkforce, RF-3390044, hard drive duplicator, hdd cloning, hdd copier
