TAMS Elektronik 40-01127-01-C HandControl 2 - Amber Prefab component 3 m

Overview

Integated pendulum operation
Hand control for EasyControl

Description

Applications
Suitable for operation with the RedBox and MasterControl digital central units. With HandControl 2, the system parameters for the EasyControl digital control can be set and the decoder data can be entered in the locomotive database of the central unit.

Display
The display shows the data of the vehicle: Address, name, data format, current speed level and direction as well as all active functions up to F20. The various functions of the locomotives can be assigned suitable graphic symbols from the integrated database (function icons).

Operation
10 locos on speed dial: With the key combination "M0" it goes back to the previously active locomotive and switching and running commands for this locomotive can be entered immediately. 9 further (favourite) locomotives can be assigned to the key combinations "M1" to "M9" and thus quickly called up at any time. 10 functions accessible: The 10-key keypad allows direct input of switching commands for the functions F0 to F9.

Integrated pendulum mode
HandControl 2 is used to configure and activate the integrated automatic pendulum control. The contacts of the two terminal stations and - if provided - of an intermediate stop are connected to 3 inputs of the first s88 module, which is connected to the control panel (RedBox or MasterControl). Tip: The s88 S88-5 feedback unit with integrated track occupancy detector is a cost-effective solution for this application (especially if feedback via the s88 bus is otherwise not used).

Delivery content

• HandControl - Connection cable - Instructions.

Keywords

04260069829097, TAMS Elektronik, 40-01127-01-C