Overview
Simple installation (230 V socket output)
Without acoustic alarm
Visual alert
Schabus 300218 Water leak detector SHT 218 Pumpensteuerung mains-powered
Currently not available
Setup notification
Notification should be active for:
Send notification by e-mail to:
Note: If the article is not available again within your desired period, your inquiry will be deleted.
Currently not available
Setup notification
Notification should be active for:
Send notification by e-mail to:
Note: If the article is not available again within your desired period, your inquiry will be deleted.
Product description
Description
The water detector SHT 218 is a ready-to-plug pump control, which switches on a connected water pump when the sensor height reaches a certain water level and switches it off again after drying the sensor and a specified time. The run-up time of the pump is set from 0 to 100 seconds via a continuously variable adjustment wheel. An optical warning signals the change in water level.
If required, you can extend the sensor cable up to 50 m with a cable (2 x 0.14 mm²). You must cut the existing sensor cable and reconnect it to the terminals.
Not suitable for fuel oil, diesel, vegetable oil, lubricating oils.
Characteristics
Connected device is activated when water is reported · Continuously adjustable follow-up time from 0 to 100 s.
Information
The operating instructions of the SHT 217 are enclosed. It is the same device with the only difference that the SHT 218 does not have an audible alarm.
Delivery content
- Water detector with sensor
- Fitting Material
- User manual.
Keywords
04044764003057, Schabus, 300218, SHT 218 Pumpensteuerung
