Pyrexx PX-1 Smoke and heat detector incl. 10-year battery battery-powered (Ø x H) 100 mm x 38 mm

Overview

12 years max. service life through permanently installed 3 V lithium battery
Cyclic real self-test function
Suitable for kitchen due to condensation barriers

Description

TUV-North tested smoke and heat detector type PX-1 for private use (suitable for kitchens!) And the housing industry according to EN14604 with bi-sensor processor technology.
Especially ecological and economical thanks to battery-typical 12 years of uninterrupted power supply!

Characteristics

Optical smoke and heat detector with mute switch · firmly integrated 3-V lithium branded battery · Optimal function check: The entire detector hood is used to check the alarm according to DIN 14676 and at the same time as an alarm stop for temporary muting in the event of unwanted alarms · Reduced detector volume (approx. 65 dBA) during initial commissioning and test operation · Note tone when the battery reserve is reached · Integrated contamination detection with acoustic fault signal when the pollution threshold is exceeded · Only acoustic warning or fault messages, e.g. when the battery reserve or contaminated sensor system is reached · additional transparency through readable event memory · Extra warning sound: 88 dBA/3 m (differentiated signal in case of smoke or heat alarm) · Tested quality with regard to long-term battery, long-term stability and automatic alarm system by KRIWAN test center based in Forchtenberg, Germany · made in Germany!

Information

Please note that the battery is permanently installed in this device and cannot be replaced.

Delivery content

• Skirting
• Case cover
• Gel-adhesive pad with extremely strong magnetic contact
• Mounting material (screw and dowel)
• Operating and installation instructions.

Keywords

04260236270936, Pyrexx, 25180003.0000, PX-1, fire protection, smoke detector