Digitus 2.5" HDD caddy

Overview

Suitable for M.2 SSD (2230, 2242, 2260, 2280) with B-Key or B+M-Key
Suitable for mSATA SSD (full size)
Allows booting from the built-in SSD

Description

With the DIGITUS® 2.5" SATA hard disk adapter, you can increase the system speed and performance cost-effectively by installing a M.2 or mSATA SSD in your PC or notebook. The hard disk adapter is used like a standard 2.5" hard disk with SATA III connection. Due to the low installation height of only 7 mm, it can be installed in all common notebooks. M.2 (NGFF) SSDs of the following type are supported: M.2 type 2230, 2242, 2260, 2280 with B-Key and B+M-Key. Support for M.2 PCIe NVMe SSDs with M-Key is not available. Furthermore, mSATA SSDs with mini PCIe 52 PIN connection are supported as a full size version. The respective integrated SSD is selected via DIP switch on the board. Boot operations are supported by the adapter for all standard operating systems such as Windows, Mac OS or Linux. The internal SSD memory is protected against dust and damage by the completely closed aluminum casing. The SATA III interface offers a data transfer rate of 6 Gbit/s, the read speed can be up to 520 MB/s, depending on the SSD used. The adapter supports SATA Rev. 3.2 with DEVSLP power saving mode.

Characteristics

Closed aluminum casing
Mode setting via DIP switch

Delivery content

• 2.5" SATA hard disk adapter M.2 or mSATA
• QIG

Keywords

04016032457688, Digitus, DA-71118, hdd caddy, hard disk drive caddy, disk drive caddy