FabConstruct L500 Spray coating

Overview

Matting surfaces made of metal and glass, and many plastics before 3D scanning
Ideal for preparation of transparent or very dark surfaces
Also for fine surface details of less than 0.2 mm size suitable

Description

Preparing objects for 3D scanning.
For many 3D scanner is the scanning of shiny, reflective and very dark objects is problematic. That's why it makes sense, these objects before the 3D scan to treat.
Because of the fine-grained structure of this sprays, it is possible to apply an even layer with minimum thickness on the scan object to spray. The average particle size is 2.8 μm.
The 3D Scan Spray is non-glare and easy to remove.
It creates a white paint coating to shining, reflective and very dark objects on the 3D scan to prepare.
Spraying you can easily take from approx. 20-30 cm distance a thin layer on the surface of the object, the matt and bright.

Also for fine scans are no problem.
In the thin layer of the fine surface details of less than 0.2 mm size is not lost. The coating can be used with a brush or sponge wash water and easily.

Information

CAUTIONS
The Spray Do not inhale! Use the spray only in the open and/or use a respiratory protection (dust).

• The spray can be very sensitive materials attack or in rough surfaces. A lasting change (e.g. Fading) of the surface can not be excluded! Test the spray and remove first of small or value objects.

Delivery content

• 500 ml 3D matting spray

Keywords

04260395363388, FabConstruct, L500

product safety