GOSSEN METRAWATT

Gossen Metrawatt Z746A Safety test lead et 4 mm plug 4 mm plug 1.00 m Blue 1 Set

CAT III 1000 V

Delivery time: 9-13 days

Gossen Metrawatt Z502X Z502X Test equipment bag

(1)

Ready case for PROFITEST MASTER with outside pockets for accessories.

Delivery time: 9-13 days

Gossen Metrawatt SC50-E 750/1A 0,5VA Kl.0,5 42 mm U142F Cable current transformer Primary current 750 A Secondary current 1 A

Black plug-in current transformer with cable, which measures electrical currents. Suitable for energy monitoring and management in devices.

Extremely easy and time-saving installation thanks to separable core halves
Particularly suitable for retrofitting, as the primary conductors can be cut open
Allows retrofitting without interrupting the power supply

Delivery time: 9-13 days

Gossen Metrawatt SSL 32EL 150 R30 Electrical load 360 V DC 30 A 150 W

Gossen Metrawatt SSL 32EL 150 R30 Electrical load 360 V DC 30 A 150 W

Potential-free output
Safe electrical separation
Output can be switched ON/OFF

Currently not available

Gossen Metrawatt Fuse Replacement fuse FF 16 A/600 V 10 pc(s)

Spare fuse for Gossen Metrawatt measuring and test equipment

Currently not available

Gossen Metrawatt SLP 120-40 Bench PSU (adjustable voltage) 0 - 40 V DC 0 - 6 A 120 W No. of outputs 1 x

Gossen Metrawatt SLP 120-40 Bench PSU (adjustable voltage) 0 - 40 V DC 0 - 6 A 120 W No. of outputs 1 x

No. of outputs 1 x
0 V DC- 40 V DC
0 A- 6 A

Currently not available

Gossen Metrawatt Z506R SK12-PE 1 pc(s)

(2)

A black test probe with a three-core connection cable, used for electrical measurements or tests.

Probe for PE with exchangeable probe tip, 12m

Delivery time: 9-13 days

Gossen Metrawatt METRACLIP 63 Clamp meter Digital CAT II 600 V, CAT III 300 V Display (counts): 9999

Digital measuring device with screen showing '-5.27 A'. On the left is a terminal block with cable.Note: In British English, decimal points are used instead of commas in numerical values, so '-5,27' becomes '-5.27'.

Pliers milliampere meter for measurement of leakage currents and process signal currents (4-20mA)
The pliers milliampere meter is best suited small direct and alternating currents from 1 mA to measure.

Delivery time: 9-13 days

Gossen Metrawatt U1389-V016 Electricity meter (3-phase) incl. converter jack Digital 5 A MID-approved: Yes 1 pc(s)

Gossen Metrawatt U1389-V016 Electricity meter (3-phase) incl. converter jack Digital 5 A MID-approved: Yes 1 pc(s)

Professional energy meter for 4-wire networks with 1 A, 5 A transformer connection
Accuracy class B for industry and trade as well as increased requirements in households
Cost savings through initial verification ex works, according to MID, conformity assessment procedure module B+D

Currently not available

Gossen Metrawatt PROFiTEST MF XTRA Profi-Set VDE tester kit, Electrical tester set Calibrated to (DAkkS standards) VDE standard

Measuring device by Gossen Metrawatt with display and accessories, including cables, clips and carry case.

Context-sensitive color graphic displayMeasurement and test procedure - simple creation of the plant structure / measuring & saving / generating logs Pre-configured and self-programmable test sequences for quick testing of electrical systems Memory concept for up to 50,000 recordsTesting all current all-current sensitive RCDs, RDC-DD, RCMBProtection of the operator by PE detection when used by finger contactTest of differential current monitoring devicesTesting of insulation monitoring devicesFuture-oriented connectivityFour-wire measuring technology - no compensation of the measurement leads required

Currently not available

Gossen Metrawatt METRAHIT 27I Handheld multimeter Calibrated to (DAkkS standards) Digital

Gossen Metrawatt METRAHIT 27I Handheld multimeter Calibrated to (DAkkS standards) Digital

In the METRAHit 27I, in addition to the milliohmmeter and multimeter, an insulation tester for measurements up to the Giga...

Currently not available

Gossen Metrawatt KE7000 Set Network tester Continuity, Location, Polarity, Break

Two blue KE7000 Ethernet cable testers, both showing wire connection diagrams and power buttons.

Network tester set for quick and easy testing of telephone, data and coaxial cables via RJ-11, RJ-45 and optional adapters.
Automatically detects continuity, interruption, short circuit, swapping, screen and multiple errors for a safe and fast line diagnosis.
More efficiency while working thanks to simultaneous display of the measurement results on Master and remote units.

Delivery time: 3-4 days