GOSSEN METRAWATT

Gossen Metrawatt M273S Handheld multimeter, Precision tester Calibrated to (DAkkS standards) Digital Data logger CAT III 1000

Ein digitales Multimeter mit Displayanzeige zeigt den Wert '101,5 MΩ'. Tasten für verschiedene Funktionen und Einstellungen sind sichtbar.

Milliohm measurement with 4-wire connection (Kelvin measurement) with 200 mA or 1A
Insulation tester with test voltages from 10 to 1000 V.
Winding test with 1000 V test voltage

This offer is only valid for business customers

Gossen Metrawatt METRISO PRIME Insulation tester 100 V, 250 V, 500 V, 1000 V, 1500 V, 2000 V, 2500 V, 5000 V 1 TΩ

Gossen Metrawatt METRISO PRIME Insulation tester 100 V, 250 V, 500 V, 1000 V, 1500 V, 2000 V, 2500 V, 5000 V 1 TΩ

Insulation measuring instrument 5000 Volt, analog
Analog high voltage insulation measuring instrument with crank inductor
Measuring voltages 100, 250, 500, 1000 V (acc. to EN 61 557 part 1) and 1500, 2000, 2500, 5000 V

This offer is only valid for business customers

Gossen Metrawatt CEE-Adapter Test lead adapter CEE connector (3-pin, 16 A), CEE connector (5-pin, 16 A), CEE connector (5-pin, 32

Multi-socket extension with two red, one blue socket and a switch. Beside it a white mains plug. Model number: SECUtest Z745A.

Adapter for three-phase consumers for connection to test equipment SECUTEST and METRATESTER

Currently not available

Gossen Metrawatt METRAFLEX 6003 XBL Clamp meter adapter A/AC reading range: 0.32 - 6000 A Flexible

A green current sensor ring with an attached electronic measuring device. Used for current measurements in electrical systems.

3-phase flexible current sensor 60/600/6000 AAC
Loop length 122 cm
4-pin Hypertronics-Stecker

This offer is only valid for business customers

Gossen Metrawatt EM2289 LON U2289-V013 Electricity meter (3-phase) Digital MID-approved: Yes 1 pc(s)

Electricity meter shows 97 kWh consumption. Large display with black letters on a grey background. Control buttons on the left-hand side.

For 4 wire networks, 400V with direct connection 5(80) A
LON bus interface
MID approval

This offer is only valid for business customers

Gossen Metrawatt METRAFLEX 3000 Clamp meter adapter A/AC reading range: 30 - 3000 A Flexible

Flexible current clamp meter with green cable and black, compact display. Red and black test leads are connected.

Measurement of alternating currents in hard-to-reach places.
High-insulated
With Switcher

This offer is only valid for business customers

Gossen Metrawatt Fuse Replacement fuse T16A/500V 10 pc(s)

Spare fuse for Gossen Metrawatt measuring and test equipment

Currently not available

Gossen Metrawatt EM2289 Modbus RTU U2289-V028 Electricity meter (3-phase) Digital MID-approved: Yes 1 pc(s)

Digital electricity metre showing '97 kWh', '0 kW' and current in amperes. Screen illuminated, with control buttons beneath.

For 4-wire networks, 400V with direct connection 5(80) A
Modbus RTU interface
MID approval

This offer is only valid for business customers

Gossen Metrawatt Z3511 Clamp meter adapter A/AC reading range: 4 - 500 A

A black pair of pliers with a wide jaw, alongside red and black plugs with cables, likely an electrical testing device.

Pliers current transformer 4 ... 500 AAC,
Ratio 1 mA/A,
Accuracy3%

This offer is only valid for business customers

Gossen Metrawatt METRISO BASE - Set Insulation tester Calibrated to (DAkkS standards) 50 V, 100 V, 250 V, 500 V 100 GΩ

Gossen Metrawatt METRISO BASE - Set Insulation tester Calibrated to (DAkkS standards) 50 V, 100 V, 250 V, 500 V 100 GΩ

High-precision insulation, low-resistance and voltage measuring instrument
Compact and robust, for harsh service applications and laboratory operation

This offer is only valid for business customers

Gossen Metrawatt Z580A Generator 5000 A Expansion board Crank inductor module for metriso Prime/5000A 1 pc(s)

Gossen Metrawatt Z580A Generator 5000 A Expansion board Crank inductor module for metriso Prime/5000A 1 pc(s)

Crank inductor module for retrofitting of METRISO PRIME on crank operation

Currently not available

Gossen Metrawatt SC50-E 300/5A 0,5VA Kl.1 42 mm U542A Cable current transformer Primary current 300 A Secondary current 5 A

A black current sensor with an open clamping range and protective housing, suitable for monitoring electrical current flows.

Extremely easy and time-saving installation thanks to separable core halves
Particularly suitable for retrofitting, as the primary conductors can be cut open
Allows retrofitting without interrupting the power supply

This offer is only valid for business customers