MEAN WELL

Mean Well ELG-150-42B-3Y LED transformer, LED driver Constant voltage, Constant current 150 W 3.57 A 21 - 42 V DC 3-in-1 dimmer

A rectangular metal enclosure with cables, labelled with technical specifications, likely an LED driver or power supply.

Constant voltage, Constant current
21 - 42 V DC
3.57 A

Currently not available

Mean Well VRLA charger PB-Akkulader 14,4V 40A 12 V Charging current (max.) 40 A

(3)

Mean Well VRLA charger PB-Akkulader 14,4V 40A 12 V Charging current (max.) 40 A

2, 3 or 8 stages Charging procedure
Relay outputs
PFC circuit

Currently not available

MW Mean Well NPF-90-24 LED driver, LED transformer Constant voltage, Constant current 90 W 3.75 A 14.4 - 24 V DC not dimmable

MW Mean Well NPF-90-24 LED driver, LED transformer Constant voltage, Constant current 90 W 3.75 A 14.4 - 24 V DC not dimmable

Constant voltage, Constant current
14.4 - 24 V DC
3.75 A

Delivery time: 1-2 days

MW Mean Well HLG-150H-24AB LED driver Constant voltage 151.2 W 3.8 - 6.3 A 22 - 27 V DC dimmable, 3-in-1 dimmer, adjustable, PFC

(13)

MW Mean Well HLG-150H-24AB LED driver Constant voltage 151.2 W 3.8 - 6.3 A 22 - 27 V DC dimmable, 3-in-1 dimmer, adjustable, PFC

Constant voltage · Independent operating device · Wide-range input · Metal housing · Overload protection through current limitation, auto recovery · Protected against short circuit, overload, overvoltage, overheating · Built-in PFC circuit · Suitable for LED lighting applications · SELV compliant · Safety Standards: EN 61347-1, EN 61347-2-13 and other · Emc Standards: EN55015, EN61000-3-2 Class C, EN 61000-3-3, EN61547 and other · IP65, output voltage and current limit can be set via internal potentiometer, dimming via running control cable, 3 in 1 dimming function (1...10 V DC, PWM, 100k ohm potentiometer)

Delivery time: 1-2 days

MW Mean Well GSM60A15-P1J Bench PSU (fixed voltage) 15 V DC 4 A 60 W

A black power supply with an attached power cable and plug.

Table power supplies with medical approval EN60601-1 (2xMOPP), complies with energy saving directive ErP. It serves as a s...

Delivery time: 1-2 days

MW Mean Well GSM40A12-P1J Bench PSU (fixed voltage) 12 V DC 3.34 A 40 W

A black power supply with a power cable and a plug, used for powering electronic devices.

Table power supplies with medical approval EN60601-1 (2xMOPP), complies with energy saving directive ErP. It serves as a s...

Delivery time: 1-2 days

MW Mean Well ELG-240-48DA-3Y LED transformer, LED driver Constant voltage, Constant current 240 W 5 A 24 - 48 V DC DALI, Suitable

(1)

MW Mean Well ELG-240-48DA-3Y LED transformer, LED driver Constant voltage, Constant current 240 W 5 A 24 - 48 V DC DALI, Suitable

Constant voltage, Constant current
24 - 48 V DC
5 A

Delivery time: 1-2 days

MEAN WELL DDR-30G-12 Rail mounted DC/DC converter (DIN) 12 V DC 2.5 A 30 W No. of outputs:1 x Content 1 pc(s)

(2)

A black DIN rail power supply with technical specifications printed on it. Suitable for electrical installations, input 18-75V, output 24V.

For DIN rail mounting. · Can be used on DIN-rail TS-35/7.5 or 15 can be installed · Width of only 35 mm · Wide input voltage range 4:1 · No minimum load required · Regulated output voltage (±10%) · Cooling by free air convection · Input/output insulation 4000 V · Protection: short circuit, overload, over voltage, input polarity, input under voltage protection

Delivery time: 1-2 days

available from 23/09/2026

MW Mean Well IRM-05-12 AC/DC PSU (print) 12 V DC 0.42 A 5 W

(3)

MW Mean Well IRM-05-12 AC/DC PSU (print) 12 V DC 0.42 A 5 W

Output 12 V DC/0.42 A;Power 5 W;Pins

Delivery time: 1-2 days

MEAN WELL DRA-60-24 Rail mounted PSU (DIN) 24 V DC 2.5 A 60 W No. of outputs:1 x Content 1 pc(s)

(5)

MEAN WELL DRA-60-24 Rail mounted PSU (DIN) 24 V DC 2.5 A 60 W No. of outputs:1 x Content 1 pc(s)

Directly on the DIN-rail mountable · Closed design, touch-proof screw terminals · Universal input
· Output voltage can be set via built-in potentiometer · Output current adjustable via external 1...10 VDC, PWM signal of the resistance. · Overload protection through current limitation, auto recovery · Protected against short circuit, overload, over voltage · LED display for power-on

Delivery time: 1-2 days

MW Mean Well TDR-960-48 Rail mounted PSU (DIN) 48 V DC 20 A 960 W No. of outputs:1 x Content 1 pc(s)

MW Mean Well TDR-960-48 Rail mounted PSU (DIN) 48 V DC 20 A 960 W No. of outputs:1 x Content 1 pc(s)

Direct assembly on DIN Rail · Enclosed case, Touch-guard screw terminals · Input Voltage: 340...550V AC · Overload protect...

Delivery time: 1-2 days

MEAN WELL PSPA-1000-12 SMPSU 12 V DC 80 A 960 W

'Mean Well' power supply unit with metal casing, model number PSPA-1000-24, 1000W power output. Suitable for industrial applications.

Closed design (case) with fan, screw terminals · Universal input and parallel function · Current Sharing up to 4000 W (3+1) · Protected against short circuit, overload, overvoltage, overheating · Built-in PFC circuit · Switching on and off of the output voltage via remote signal · Sensor connection for correct voltage at the load

Delivery time: 1-2 days