Benning DUSPOL digital Two-pole voltage tester CAT III 1000 V, CAT IV 600 V LCD, Vibration, Acoustic

Overview

Voltage from 1 - 1000 V AC TRMS/ 1200 V DC
Continuity test up to 100 kΩ
Resistance up to 300 kΩ
Frequency from 1 - 1000 Hz
Diode test up to 2 V
Field direction, phase and phase, Polarity check
VDE approval
CAT IV 600 V
Load connection with vibration alarm
Conscious tripping of a 30 mA FI-Circuit breaker
Additional field direction test in three-phase mains
Single-pole outer conductor test (phase)
Acoustic continuity test via loud test buzzer and optical display via yellow LED
Measuring point illumination via white high power LED
Turning field direction test via green LED (left/right)
Detector for contactless localization of cable breaks on exposed and live cables
Voltage test up to 1000 V AC TRUE RMS/ 1200 V DC
Real-lifeEffective value measuring method TRUE RMS
Low Volt range: 1.0 V to 11.9 V
Frequency display up to 1000 Hz
Resistance measurement up to 300 kΩ
Pass voltage measurement

Description

The DUSPOL digital is a digital TRUE RMS voltage and continuity tester with resistance and frequency range. The voltage tester is suitable for use in electrical engineering, industry, maintenance, service (troubleshooting) and photovoltaics.

Characteristics

Voltage from 1 V - 1000 V AC TRUE RMS / 1,200 V DC (LCD) - Display levels: 50, 120, 230, 400 V AC/ DC (LED) - Backlit dual display to indicate frequency (small display) and voltage (large display) or resistance - Optical continuity test up to 100 kΩ (yellow LED) - Resistance measurement: 0.1 kΩ - 300 kΩ (LCD) - Diode test: 0.3 V - 2 V (LCD) - Phase direction (green LED)/ Phase test (red LED), Polarity test (LCD) - Frequency measurement: 15 Hz - 1000 Hz - Direct display without pushbutton actuation (high-impedance test) - Load connection via pushbutton (low-impedance test) - Conscious triggering of the residual current circuit breaker - Vibrating alarm in the test handle - Measuring point and display lighting - Protection class IP 65 (dust-tight/protected against water jets) - Robust housing design with rubberised grip surface - Tested and approved according to DIN EN 61243-3, VDE 0682-401 - Overvoltage category CAT IV 600 V, CAT III - CAT III - Overvoltage category CAT IV 600 V, CAT III - Overvoltage category CAT IV III-401

Delivery content

• 2 x 1.5 V micro-batteries (LR03/ AAA) - instruction manual.

Keywords

4014651502635, Benning, 50263, DUSPOL digital, Voltage tester, tester