SVS Nachrichtentechnik CX-12 T Transmitter unit Max. range (open field): 1000 m 2 V DC, 3.6 V DC

Overview

Feedback signal
Range up to 1000 m
2 adjustable frequencies Low-noise signal transfer

Description

The sending module is for transmission of 4 switching informations and suits a current-value. The module sends the information,as long as at least one digital input is active. In case of the right acknowledgement of the receiver,the message is 3x/s repeated. The deactivation of digital input originated the message of a out-signal to the receiver, which switches-off the corresponding out-put. If no acknowledgement comes, sending continues for 3 seconds, in order to contact the eventually clocked receiver. For plug-in of LEDs, Piezodisk etc. are available for further input and outputs. Selectable frequencies (433.62 and 434.22 MHz) together with a special transmission protocol lead to an extremely trouble-free control Coverage possible up to 1000m depending on places.

Characteristics

Transmission of 4 digital states and 1 analogue value
2-, 4-, 5- and 5-pin rows, grid 2.54mm
Inputs: 1x digital: Frequency setting 4x digital: D1 to D4 (e.g. Tap-in unit) 1x analogueue: Voltage value
Outputs: 2x digital: E.g. for controlling LED´s 1x digital: Control of a piezoelectric disk 1x digital:
Activation of a supply support 1x analogue: Filtered PWM signal of the RSSI receiver
2 adjustable frequencies
Safe and low-interference signal transmission
Radio system with feedback
Control functions: 4 digital inputs + 1 analogueue input
Current consumption: Transmission: 6.5 mA / Standby: 0.1uA
Temperature range: -20°C to +65°C.

Information

No antenna included
Suitable receivers and modules - see optional accessories .
The free-field range is only achieved under optimum conditions.
Caution: SH-7 Series products are not compatible with SH-12 Series products.

Delivery content

• Transmission module
• User manual.

Keywords

SVS Nachrichtentechnik, 01280.00, CX-12 T, CX-12 T / 01280.00, CX-12-T---01280.00