Overview
Command duration for access is approx. 1 ms
Up to 16 identical modules in one system
Up to 3 A Outputs
Deditec USB-OPTO-RELAIS-8 IO module USB No. of digital inputs: 8 No. of relay outputs: 8
Product description
Description
Top hat rail mounting and full metal housing characterize these robust modules. By optimizing the USB controller, it was possible to reduce the command duration for this series, e.g. for switching one or 64 relays, to approx. 1 ms. Inputs: The inputs are galvanically isolated, 15 - 30 V input voltage are standard. By exchanging a resistor network it is possible to switch to 5 - 15 V. Input counter and input change flags for each channel counter/detect change of state. Outputs: Relays with 36 V/DC switching voltage at 15 W and 1 A are used here. A timeout protection ensures that the outputs are switched off in the event of a fault (configurable via software). Versions with 3 A relays are also available! Multiple modules in the system: Up to 16 identical modules can be managed in one system. For this purpose, a Windows® tool assigns a number to each module in order to enable unique addressing. Condition visualization: The visualization of the inputs and outputs by one LED each also simplifies connection wiring and programming. Connectors: A service-friendly connector system is used as the connection wiring, which enables uncomplicated plugging in and plugging out as well as rapid rewiring of the plug connectors. Software: The DELIB driver library included in the scope of delivery makes it easy to address almost any programming language.
Characteristics
Detection of status changes between the readout clocks (flip-flop) - Status LEDs - Timeout protection.
Delivery content
USB connection cable - CD-Rom - Configuration program - Graphical test programs - Programming examples for C, C++, C#, VB, VB.net, Delphi and Labview.
Requirements
Windows® 2000/XP/Windows Vista™/Windows® 7 and Linux.
Keywords
N/A, Deditec, USB-OPTO-RELAIS-8