Overview
Analogue output with manual/auto switching and feedback
Image is similar
Analogue output with manual/auto switching and feedback
This setpoint generator controls output of an analog signal in case of an emergency from 0 - 10 V, among other things, valves, mixing flaps or temperature values. Via a 2-stage switch is used to switch the module in 2 modes of operation (manual/auto). Position of the potential-free contact S1/S2 has recovered to a statement, if the module is in the hand or AUTO mode. Apply the Analogue value generator, among others, in building automation.
Switch position "Manual": The setpoint is set by the potentiometer on the front. The signal is between the terminals Y and A2.
Switch position "AUTO": The setpoint is without changing over the terminal Y to d terminals YR-linked.
04016138787023, Appoldt, 3101, AWG-0-10V, interface relay, interface relaysrelay